Buckinghamshire · England
Bath chip & crack repair in Penn Street, Buckinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Penn Street, carried out at your home and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Scratches you can feel with a fingernail
About our bath repair in Penn Street
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. Typical jobs include a chipped rim or side and rust by the waste and overflow, in acrylic, roll-top & freestanding and cast iron enamel.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Penn Street (HP7)
- County
- Buckinghamshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Looking after it afterwards
To keep it looking its best for years:
- Don’t leave a fresh chip for long
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Penn Street and nearby
Penn Street is about 3 miles south-west of Amersham, in Buckinghamshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 263 places across Buckinghamshire, from the larger towns to small villages. You can also see our page for London, about 27 miles away.
Jobs in HP7 work the same way as everywhere else we cover. Close by, we cover Woodrow (1 mile east), Mop End (1 mile north), Beamond End (1 mile north-west), Winchmore Hill (1 mile south-east) and Coleshill (2 miles south-east). Larger places within reach include Aylesbury (13 miles north-west), High Wycombe (4 miles south-west), Chesham (4 miles north-east), Marlow (8 miles south-west), Amersham (3 miles north-east) and Beaconsfield (3 miles south).
Local landmarks in Penn Street
Our customers here include homes close to The Squirrel pub, Holmer Green Senior School and Curzon Church of England Combined School. For rail, the closest station is Amersham station, roughly 2.6 miles north-east of the centre. Further afield, we also cover the area around Great Missenden (2.7 miles north) and Amersham Hospital (1.8 miles east). Not far away are Gomm's Wood.
Penn Street: your questions answered
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you quote from photos?
Nearly always. If pictures do not show enough, we will ask for another angle.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote.
Do you cover Penn Street?
Yes. We work across the UK and come to Penn Street. Send us photos for a fixed quote, or call 0345 017 0787.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Read more
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
What affects the price in Penn Street
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- Where the damage is and how we get to it
- The colour and finish to match
- Any earlier repairs that need removing first
- The material and finish
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- Any details about the material
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Landlords, agents and businesses in Penn Street
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Nearby places to Penn Street
Other services in Penn Street
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Repair or replace in Penn Street?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Penn Street customers choose us
- Technicians who travel to you, UK-wide
- No extra charge for your area
- Fixed prices from your photos
- No need to remove anything
See our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
