Conwy · Wales
Bath chip & crack repair in Penrhyn Bay, Conwy
We travel to Penrhyn Bay for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chipped rim or side
How we handle bath repair in Penrhyn Bay
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Common call-outs are for a chipped rim or side and damage beneath the taps, in acrylic, whirlpool & spa baths and cast iron enamel.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Penrhyn Bay (LL30)
- County
- Conwy
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Penrhyn Bay
Repairs from £95. There’s no charge for travel to Penrhyn Bay. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
You can normally get a fixed price without us visiting. To make it quick:
- A photo taken from further back
- Something in shot to show the size
- What it’s made of, if you know
- A close-up of the damage, in focus
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Nearby places to Penrhyn Bay
Other services in Penrhyn Bay
Do you need bath repair in Penrhyn Bay?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted:
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Chips under the taps
Comparing quotes
- Who will actually do the work
- Whether the price covers travel
- How the room is protected while they work
- Aftercare advice
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Penrhyn Bay
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Where we work around Penrhyn Bay
Penrhyn Bay is about 2 miles east of Llandudno, in Conwy. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Penrhyn Bay is one of 75 places in Conwy where we work. Our nearest city page is Liverpool, about 35 miles away.
Jobs in LL30 are booked in the same way as anywhere else. Jobs here include addresses on Llandudno Road, Shaftesbury Avenue and Dakla Drive. Being close to the B5115, Penrhyn Bay is easy for our technicians to reach. If you’re just outside Penrhyn Bay, we cover Glanwydden (1 mile south), Penrhyn-side (1 mile north-west), Llangwstenin (1 mile south), Rhos-on-Sea (1 mile east) and Bryn Pydew (1 mile south). Larger places within reach include Old Colwyn (3 miles south-east), Colwyn Bay (3 miles south-east), Abergele (8 miles east), Colwyn Bay (3 miles south-east), Conwy (3 miles south-west) and Cwlach (3 miles west).
What’s near Penrhyn Bay
In Penrhyn Bay, that means homes near Ysgol John Bright, St Trillo's Church and Ysgol y Creuddyn. Other local landmarks include Penrhyn Old Hall pub (within half a mile west) and Llandrillo Yn Rhos Primary School (1 mile east). The nearest railway station is Llandudno station, roughly 2.3 miles west of the centre. Nearby you’ll also find Doll Museum & Model Railway (1.4 miles west) and Llandudno General Hospital (2.3 miles west). For a walk, there’s Mynydd Pant and Conwy RSPB reserve.
- Parks and local facilities nearby include Marl (2.4 miles south-west)
Landlord and trade work in Penrhyn Bay
For anyone letting property in or around Penrhyn Bay, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
The process
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a few hours, depending on the damage.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Get a quote
Most clients in Penrhyn Bay get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Penrhyn Bay: your questions answered
How long before I can use the bath?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
