Birmingham · England

Bath Repair for Perry Beeches homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Perry Beeches, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A cracked acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Perry Beeches

Keeping it looking good

So the finish stays in good condition:

  • Fix dripping taps early to stop staining and limescale
  • Keep metal cans and razors off the surface
  • If an acrylic bath flexes, have its feet adjusted
  • Have new chips seen to early

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Bath repair in Perry Beeches, done in place

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. If you’re dealing with a chip where the taps sit and impact holes in acrylic, we can help, whatever the material.

Big or small, it’s backed by a one-year guarantee in Perry Beeches and across Birmingham.

Location
Perry Beeches (B42, B44)
Region
Birmingham
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Why repair rather than replace?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

Why book with us

  • Everything repaired in place
  • We come to you, anywhere in the UK
  • A year’s guarantee on all work
  • Colour-matched on site

See our prices page and bath cost comparison.

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Getting ready for the visit

  • Let us know which floor the room is on
  • Clear toiletries, mats and anything else from around the area
  • Plan for the room to be out of bounds to pets and children

Get a quote

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Advice

Repairs by material

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Signs you need bath repair in Perry Beeches

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Most people get in touch when they notice one of these:

  • Chips on the rim or sides
  • Chips caused by builders
  • A chip where the taps sit
  • Deep scratches in acrylic

What to look for in a quote

  • If travel is included in the price
  • How changes to the job are handled
  • Whether cleaning and preparation are in the price
  • When it can be used again

Choosing a repair company

FAQs for Perry Beeches

How much does bath repair cost in Perry Beeches?

Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your B42 postcode.

Are there extra charges for Perry Beeches?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Is repairing better than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Can I add another job to the visit?

Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.

Can you redo an old repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Can you repair a hole in a bath?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

Perry Beeches and nearby

Perry Beeches is about 3 miles west of Erdington, in Birmingham. Clients in Perry Beeches get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Perry Beeches is one of 140 places in Birmingham where we work.

Postcode districts we cover here: B42 and B44. That includes homes on Edale Road, Sandy Lane and Curbar Road and the roads around them. Close by, we cover Tower Hill (1 mile west), Perry Barr (1 mile south), Hamstead (1 mile south-west), Queslett (1 mile north) and Lea Hall (1 mile south). Larger places within reach include Birmingham (5 miles south), Royal Sutton Coldfield (4 miles north-east), Erdington (3 miles east), Lee Bank (5 miles south), Cape Hill (4 miles south-west) and Streetly (3 miles north).

Landmarks near Perry Beeches

Typical jobs here are in homes near The Beeches pub, Arena Academy and Beeches Infant School, among other places. You will also find Arena Academy (less than half a mile north), Perry Park (under half a mile south) and St Matthew's Church (0.5 miles north-east). Perry Beeches’s nearest station is Hamstead station, about 1 mile west. Well-known places in the area include One Stop Shopping Centre (1.3 miles south) and Witton Isolation Hospital (1.4 miles east). Open spaces near Perry Beeches include Queslett Nature Reserve and Barr Beacon.

  • Parks and local facilities nearby include Aston Manor (2.6 miles south)
Map of Perry Beeches © OpenStreetMap contributors

What bath repair costs

Repairs from £95. Quotes are free and the price is fixed. What we look at:

  • The material and finish
  • Unusual colours or finishes
  • What kind of damage it is
  • Where the damage is and how we get to it

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your pictures

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Daylight if possible, and no flash reflection
  • A wider photo showing the entire bath
  • The material, if you know it
  • One sharp close-up of the damage

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.

When we’d advise against a repair

We won’t take on work that won’t last, so these are the limits:

  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense
  • Water coming from the waste or taps rather than the bath

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.