Cambridgeshire · England
Bath chip & crack repair in Perry, Cambridgeshire
Bath repair for Perry, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Rust spots around the plughole
- A kit repair that didn’t last
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the entire surface, which needs re-enamelling
Send us photos and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Bath repair in Perry, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and acrylic, and common reasons people contact us are damage beneath the taps and rust by the waste and overflow.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Perry (PE28, PE19)
- County
- Cambridgeshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Perry
Perry is about 4 miles north-west of St Neots, in Cambridgeshire. Jobs in Perry are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 371 towns and villages in Cambridgeshire. Our jobs stretch from Perry to London (about 55 miles away).
Our repair technicians cover all of PE28 and PE19 and the streets around it. You’ll find streets such as Crow Spinney Lane, The Drive and Roman Way. Neighbouring places we cover include East Perry (1 mile north-east), West Perry (1 mile north), Great Staughton (1 mile south-west), Stonely (3 miles west) and Little Staughton (3 miles south-west). Further out, we also cover St Neots (4 miles south-east), Huntingdon (7 miles north-east), St Ives (11 miles east), Cambourne (12 miles east), Godmanchester (7 miles east) and Ramsey (15 miles north-east).
Landmarks near Perry
We visit homes around Wheatsheaf pub. For rail, the closest station is St Neots station, roughly 4.6 miles south-east of the centre. A little further out are Kimbolton Castle (3 miles west) and Taggart Tile Museum (1.7 miles south-west). Open spaces near Perry include Grafham Water.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
What affects the price in Perry
Prices start from £95. We price every job individually. What matters most is:
- The material and finish
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Our prices are the same across the UK, so there’s no premium for Perry. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- Natural light rather than flash
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Work for landlords and builders
Landlords, letting agents and housing providers in Perry use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Towns and villages near Perry
Also in Perry
Common problems we fix in Perry
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Clients generally contact us about:
- Damage beneath the taps
- Deep scratches in acrylic
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
What to look for in a quote
- How to look after the finish
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- What protection goes down before work starts
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Why book with us
- Honest advice, even when it means no job
- Work done at your home or business
- CHAS and Constructionline accredited
- Fixed prices from your photos
See our prices page and guide to resurfacing and replacement costs.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Your questions about bath repair in Perry
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
How long before I can use the bath?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Are there extra charges for Perry?
No. Our quotes include travel, and we charge the same wherever you are.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.
