Cambridgeshire · England
Bath Repair for West Perry homes
Bath repair for West Perry, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Chips on the rim or sides
- A kit repair that didn’t last
Bath repair in West Perry, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include cracks in an acrylic bath and scratches you can feel with a fingernail, across whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
All our work is covered by our one-year guarantee.
- Area
- West Perry (PE28)
- Area hub
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Places near West Perry
Also in West Perry
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
How we price bath repair
Repairs from £95. There’s no charge for travel to West Perry. The price comes down to:
- Whether old repairs or coatings need taking off
- What the surface is made of
- How many items we do on one visit
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to two to three hours for most chips.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
How to get a price
Send us photos of the damage and one of the whole item, with your PE28 postcode, and we will reply with a fixed price.
Read more
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaking fittings, which need a plumber
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Should you replace it?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- We come to you, anywhere in the UK
- One price list for the whole UK
- Nothing taken out or refitted
- Colour-matched on site
See our prices page or bath cost comparison.
When to call us in West Perry
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
People typically call us after spotting something like this:
- A hole punched through by something heavy
- Chips on the rim or sides
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
Before booking anyone
- How long it needs to cure
- Whether the price covers travel
- What prep work is covered
- How the room is protected while they work
West Perry and the surrounding area
West Perry is about 5 miles north-west of St Neots, in Cambridgeshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in 371 places in Cambridgeshire, from the larger towns to small villages. Our nearest city page is London, about 55 miles away.
Our visits in PE28 are booked in the same way as anywhere else. Jobs here include addresses on Welby Close, Whitehall Way and Glebe Road and the roads around them. Other places close to West Perry include East Perry (1 mile south-east), Perry (1 mile south), Great Staughton (2 miles south-west), Stonely (3 miles west) and Little Staughton (4 miles south-west). Further out, we also cover St Neots (5 miles south-east), Huntingdon (7 miles north-east), St Ives (11 miles east), Cambourne (12 miles south-east), Godmanchester (7 miles east) and Ramsey (14 miles north-east).
Around West Perry
Our customers here include homes close to Wheatsheaf pub and the streets around them. The closest station to West Perry is St Neots station, roughly 5 miles south-east. Well-known places in the area include Taggart Tile Museum (2.1 miles south-west) and Kimbolton Castle (2.9 miles west). The countryside around West Perry includes Grafham Water.
Aftercare tips
Once the work has cured, treat it gently:
- Rinse it down after each bath
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Common questions in West Perry
Do you cover the entire of Cambridgeshire?
Across the UK, so West Perry is covered. Our prices are the same everywhere.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
About our accreditations · Every repair comes with a one-year guarantee.
