Cheshire East · England
Bath Repair in Pickmere
Bath repair for Pickmere, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
Bath repair in Pickmere, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. If you are dealing with impact holes in acrylic and snagging damage from a refit, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Pickmere (WA16)
- Area hub
- Cheshire East
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Pickmere questions
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can you repair a hole in a bath?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Pickmere.
How long does the repair take to cure?
Generally within a day, depending on the repair.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Pickmere and the surrounding area
Pickmere is about 3 miles north-east of Northwich, in Cheshire East. From the centre of Pickmere to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Pickmere is one of 254 towns and villages in Cheshire East we cover. You can also see our page for Manchester, about 17 miles away.
Our visits in WA16 are booked in the same way as anywhere else. We regularly work on streets such as Clover Drive, The Elms and Mere Lane and the roads around them. If you’re just outside Pickmere, we cover Higher Wincham (1 mile south), Wincham (1 mile south-west), Lostock Gralam (1 mile south), Marston (2 miles south-west) and Lostock Green (2 miles south). Larger places within reach include Crewe (13 miles south), Macclesfield (14 miles east), Congleton (14 miles south-east), Wilmslow (10 miles east), Knutsford (4 miles east) and Middlewich (7 miles south).
What’s near Pickmere
Our clients here include homes close to The Rudheath Senior Academy and Wincham Community Primary School. For rail, the closest station is Lostock Gralam station, about 1.5 miles south. A little further out are Victoria Infirmary (2.9 miles south-west) and Cuckooland Museum (1.9 miles east). Open spaces near Pickmere include Neumann's Flash and Marbury Reedbed Nature Reserve.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Store metal items away from the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave a fresh chip for long
- Get a dripping tap fixed promptly
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Pickmere
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- The colour and finish to match
- How easy the damage is to reach
- How much damage there is
- The material
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Do you need bath repair in Pickmere?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Signs it’s time to call us include:
- Damage done while the bathroom was being fitted
- A chip where the taps sit
- Scuffs and scratches in the surface
- A cracked acrylic bath
Questions to ask before booking
- Aftercare advice
- A fixed price, and whether VAT is included
- How your room will be protected
- Whether they match the colour on site
Places near Pickmere
What else we do in Pickmere
What we cannot put right
We will always be straight with you, so here’s what a repair won’t do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a morning or an afternoon, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
Getting a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
