Cheshire East · England

Bath re-enamelling & resurfacing in Pickmere, Cheshire East

Bath re-enamelling for Pickmere, without a refit. Get a fixed price from your photos, then we come to you.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Pickmere

What happens on the day

We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Point us to the nearest place to park
  • Ensure the area is dry
  • Let us know which floor the room is on

Get a quote

Most customers in Pickmere get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send pictures for a quote

Related advice

Bath re-enamelling in Pickmere, done in place

We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our technicians work on basins & shower trays, cast iron baths and acrylic baths, and common reasons people get in touch are an outdated colour you’d like to change and an old resurfacing that’s failing.

Whatever the size of the job, it’s backed by a one-year guarantee in Pickmere and across Cheshire East.

Where
Pickmere (WA16)
Area hub
Cheshire East
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Prices and what affects them

Prices start from £350. A fixed quote means you know the cost before you book. We look at:

  • The material
  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Send pictures for a quote

Phone photos are fine. Make sure they show:

  • Details of any past repairs
  • Natural light rather than flash
  • A wider photo showing the entire bath
  • Any details about the material

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.

Covering Pickmere

Pickmere is about 3 miles north-east of Northwich, in Cheshire East. Jobs in Pickmere are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Our repair technicians cover all 254 towns and villages across Cheshire East. Our jobs stretch from Pickmere to Manchester (17 miles away).

Here we cover the WA16 postcode area. That includes homes on Clover Drive, The Elms and Mere Lane. Neighbouring places we cover include Higher Wincham (1 mile south), Wincham (1 mile south-west), Lostock Gralam (1 mile south), Marston (2 miles south-west) and Lostock Green (2 miles south). We also work in nearby towns such as Crewe (13 miles south), Macclesfield (14 miles east), Congleton (14 miles south-east), Wilmslow (10 miles east), Knutsford (4 miles east) and Middlewich (7 miles south).

Around Pickmere

Locally, our jobs take us to homes close to The Rudheath Senior Academy and Wincham Community Primary School and the streets around them. For rail, the closest station is Lostock Gralam station, roughly 1.5 miles south of the centre. A little further out are Victoria Infirmary (2.9 miles south-west) and Cuckooland Museum (1.9 miles east). Green spaces nearby include Neumann's Flash and Marbury Reedbed Nature Reserve.

Map of Pickmere © OpenStreetMap contributors

When to call us in Pickmere

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Typical reasons for a call-out include:

  • A bath that stays dull however much you clean it
  • An original cast iron bath that needs restoring
  • A peeling or bubbling previous coating
  • Worn patches where water runs and sits

Questions to ask before you book

  • When it can be used again
  • What preparation is included
  • How long the guarantee is and what it covers
  • Aftercare advice

Choosing a repair company

Landlords, agents and businesses in Pickmere

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

If you manage property in Pickmere, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.

Why repair rather than replace?

If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why Pickmere customers choose us

  • One visit for most repairs
  • Same prices wherever you are
  • A year’s guarantee on all work
  • Repair technicians who travel to you, UK-wide

Read our full price list and bath cost comparison.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Holes rusted through the metal
  • Leaking taps or wastes (a plumber’s job)
  • A bath split right through the body

Send us photos and we will tell you honestly.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

Repairs by material

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Common questions in Pickmere

Which areas do you work in?

We cover the entire UK, including Pickmere and the rest of Cheshire East. Just include your postcode and we will offer you dates.

Can you do the outside of a roll-top?

Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Are there extra charges for Pickmere?

We don’t add a call-out fee. Your fixed quote includes everything.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Just add the extra items to your pictures and we’ll quote them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.