Warwickshire · England
Bath chip & crack repair in Pinwall, Warwickshire
Bath repair in Pinwall without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Chips caused by builders
- Holes from dropped items
Bath repair in Pinwall without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Typical jobs include a kit repair that didn’t last and chips caused by builders, in cast iron enamel, pressed steel enamel and roll-top & freestanding.
All our work comes with a one-year guarantee.
- Where
- Pinwall (CV9)
- Area hub
- Warwickshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Pinwall
Pinwall is about 6 miles north-west of Nuneaton, in Warwickshire. From the centre of Pinwall to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover all 324 towns and villages in Warwickshire. Our jobs stretch from Pinwall to Birmingham (17 miles away).
Here we cover the CV9 postcode area. Streets in the area include Pinwall Lane, Atherstone Road and Sheepy Road. Nearby, we also work in Whittington (1 mile south-west), Ratcliffe Culey (1 mile east), Atherstone (1 mile south), Witherley (2 miles south-east) and Merevale (2 miles south-west). Within a short drive, we also cover Nuneaton (6 miles south-east), Bedworth (9 miles south), Fordbridge (12 miles south-west), Castle Vale (11 miles south-west), Chilvers Coton (7 miles south-east) and Camp Hill (5 miles south).
What’s near Pinwall
Around Pinwall, we work in homes near The Queen Elizabeth Academy and Church of All Saints and the streets around them. The nearest railway station is Atherstone station, about 1.4 miles south. A little further out are Atherstone Heritage Centre (1.4 miles south) and Ratcliffe Culey (1.2 miles south-east).
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What we are called out for in Pinwall
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Look out for any of the following:
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- Chips under the taps
- Rust spots around the plughole
What your quote should include
- How changes to the job are handled
- Aftercare advice
- How long the guarantee is and what it covers
- How soon you can use it again
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Towns and villages near Pinwall
More services for Pinwall
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the following day, the bath is ready to use.
Getting ready for the visit
- Ensure the area is dry
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
Getting a price
Most customers in Pinwall get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Questions from Pinwall
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Do you work in Pinwall?
We do. We send a technician to Pinwall for every job, with no extra charge for travel.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
Send us pictures and we will tell you honestly before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How we price bath repair
Repairs from £95. There’s no area surcharge for Pinwall. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- The colour and finish to match
- The material and finish
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Good photos mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Natural light rather than flash
- Details of any past repairs
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Repairing versus replacing in Pinwall
Many people think a damaged bath means a new one. Normally it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why Pinwall clients choose us
- Fixed prices from your pictures
- We leave the room as we found it
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
