South Ayrshire · Scotland

Bath Repair in Pinwherry

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Pinwherry, with a one-year guarantee on every repair.

  • Repairs from £95
  • A kit repair that didn’t last
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Pinwherry

How we handle bath repair in Pinwherry

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. We regularly repair cast iron enamel, pressed steel enamel and roll-top & freestanding, and the jobs we see most are rust spots around the plughole and chips caused by builders.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Area
Pinwherry (KA26)
County
South Ayrshire
Warranty
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

When a repair isn’t the answer

To be straight with you, there are a few things a repair won’t fix:

  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense
  • Acrylic cracks with no access behind them

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths

Should you replace it?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • Rooms protected and left tidy
  • Honest advice, even when it means no job
  • No need to remove anything
  • Work done at your home or business

See our full price list or resurfacing vs replacement cost guide.

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Put a towel in the bath if you are working above it
  • Give the bath a quick rinse after use
  • Store metal items away from the bath
  • Clean with warm water and a mild detergent

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

What affects the price in Pinwherry

Prices start from £95. There’s no charge for travel to Pinwherry. The price comes down to:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • Access to the area
  • The size and number of damaged areas

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • A picture taken from further back
  • Natural light rather than flash

The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.

Different materials, different repairs

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Signs you need bath repair in Pinwherry

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

The most common problems we’re called about are:

  • Deep scratches in acrylic
  • A chipped rim or side
  • Rust by the waste and overflow
  • Damage done while the bathroom was being fitted

Questions to ask before booking

  • Whether a trained technician does the job
  • When it can be used again
  • What preparation is included
  • Aftercare advice

10 questions to ask before you book

How it works

Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes a few hours, depending on the damage, and you can get on with other things while we are there.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Plan for the room to be out of bounds to pets and children
  • Mention any earlier repairs or resurfacing

How to get a price

Send us photos of the damage and a wider shot of the entire item, with your KA26 postcode, and we will come back with a fixed quote.

Get a free quote

Read more

For landlords and businesses

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

About Pinwherry

Pinwherry is about 18 miles north-east of Stranraer, in South Ayrshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 52 towns and villages across South Ayrshire, from the larger towns to small villages. You can also see our page for Glasgow, about 54 miles away.

We work across the KA26 postcode area and the streets around it. From Main Street and Barrhill Road or anywhere nearby, a technician can come to you. Other places close to Pinwherry include Colmonell (3 miles west), Barrhill (4 miles south-east), Lendalfoot (4 miles west), Barr (7 miles north-east) and Girvan (7 miles north).

Local landmarks in Pinwherry

For rail, the closest station is Barrhill station, about 3.7 miles south-east. Other landmarks nearby include Knockdolian Castle (4.7 miles west). For a walk, there is Pinclanty Loch.

Map of Pinwherry © OpenStreetMap contributors

Common questions in Pinwherry

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

How soon can you come?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Is a repair better than a new one?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Can you repair something that’s been repaired before?

Yes, we often do. Removing the old work can add time, and that is in the quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.