South Ayrshire · Scotland

Bath Resealing in Pinwherry

We travel to Pinwherry for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • A messy previous reseal
  • Gaps by the taps
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Pinwherry

Bath resealing in Pinwherry without replacing anything

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, plus curing time. We are often asked to fix black mould in the sealant and missing sealant behind the taps, across kitchen worktops & sinks, shower trays & enclosures and basins & vanity units.

Whatever the size of the job, you get the same one-year guarantee in Pinwherry and across South Ayrshire.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Pinwherry (KA26)
Region
South Ayrshire
Cover
One year on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

It’s all simple stuff:

  • Keep bottles off the joints
  • Reseal at the first sign of lifting
  • Clean the joints with a mild cleaner
  • Let steam out after showers

Good ventilation is the best protection, and wipe the joints after use to keep mould away.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

Landlord and trade work in Pinwherry

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.

Questions from Pinwherry

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Can you quote from pictures?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

When can I use the bath after resealing?

Generally after around 24 hours. We confirm before we leave.

Can you repair something that is been repaired before?

Generally, yes. The old repair comes out first, so mention it when you send photos.

My seal keeps tearing. Why?

Normally because the bath or tray moves. We fill the bath before sealing it.

Will the price change on the day?

The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.

Why does mould come back so fast?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Where we work around Pinwherry

Pinwherry is about 18 miles north-east of Stranraer, in South Ayrshire. We travel to clients in Pinwherry and the surrounding area, so there’s no workshop to go to. Pinwherry is one of 52 towns and villages in South Ayrshire we cover. You can also see our page for Glasgow, about 54 miles away.

Every address in KA26 is within our area, from the main roads to the quietest streets. From Main Street and Barrhill Road or a nearby road, we can come to you. We also travel to Colmonell (3 miles west), Barrhill (4 miles south-east), Lendalfoot (4 miles west), Barr (7 miles north-east) and Girvan (7 miles north).

Landmarks near Pinwherry

The nearest railway station is Barrhill station, roughly 3.7 miles south-east. A little further out are Knockdolian Castle (4.7 miles west). Not far away are Pinclanty Loch.

Map of Pinwherry © OpenStreetMap contributors

The process

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a couple of hours. We clean up when we are done and tell you when it’s ready to use.

  1. All the old sealant is cut out and removed.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Before we arrive

  • Make sure the area is dry
  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift

How to get a price

The quickest way to a price is to send two or three photos using our quote form or ring us. We will say straight away if a repair is the right fix.

Get a fixed quote

Related advice

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.

Why book with us

  • Free fixed quotes from pictures
  • Dust sheets down, tidy finish
  • Same prices wherever you are
  • Repair technicians who travel to you, UK-wide

Take a look at our prices page.

Different materials, different repairs

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Honest limits

Some jobs are not right for a repair, for example:

  • Very wide gaps that need a trim
  • A bath or tray that moves, until its support is fixed
  • Rotten walls or floors behind the bath

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units
  • Baths

Signs you need bath resealing in Pinwherry

Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.

Typical reasons for a call-out include:

  • Black spots in the silicone
  • Missing sealant behind the taps
  • Discoloured, yellow sealant
  • Gaps in the seal

What to look for in a quote

  • Whether there are any call-out or travel charges
  • How the colour is matched
  • Aftercare advice
  • How long the guarantee is and what it covers

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.