Norfolk · England
Bath Repair in Pollard Street
Our technicians come to Pollard Street for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Hairline or through cracks in acrylic
Bath repair in Pollard Street, done in place
Most of our bath repairs take a few hours, and the bath is back in use the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Whether it’s damage beneath the taps and deep scratches in acrylic, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pollard Street (NR12)
- Region
- Norfolk
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Simple care helps the repair last. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
What we cannot put right
We will always be straight with you, so here’s what a repair won’t do:
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Pollard Street
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Also near Pollard Street
Also in Pollard Street
When to call us in Pollard Street
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Customers generally contact us about:
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
- Holes from dropped items
- A kit repair that didn’t last
Before booking anyone
- How long the guarantee is and what it covers
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- What preparation is included
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
What affects the price in Pollard Street
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How easy the damage is to reach
Our prices are the same across the UK, with no extra for Pollard Street. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Questions from Pollard Street
Do you cover the whole of Norfolk?
Across the UK. Prices do not change with location.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Pollard Street and nearby
Pollard Street is about 4 miles north-east of North Walsham, in Norfolk. Across the NR12 area, a technician comes to you. Our technicians cover 797 places in Norfolk.
Postcode districts we cover here: NR12. Local streets include Bloodslat Lane and North Walsham Road, all of which we cover. We also cover the places around Pollard Street: Bacton (1 mile north-east), Edingthorpe (1 mile west), Broomholm (1 mile east), Keswick (1 mile east) and Witton (1 mile south). Further out, we also cover Sprowston (14 miles south-west), Thorpe St Andrew (15 miles south), North Walsham (4 miles south-west), Sheringham (13 miles north-west), Cromer (9 miles north-west) and Aylsham (10 miles west).
Local landmarks in Pollard Street
Around Pollard Street, we work in homes near Bacton Primary School and Church of St Andrew and the streets around them. For rail, the closest station is North Walsham station, roughly 3.9 miles south-west of the centre. Nearby you will also find Norfolks Golden Fleece Heritage Museum (3.4 miles south-west) and Dilham Castle (4.1 miles south).
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
