Norfolk · England
Bath chip & crack repair in Ridlington, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Ridlington and across Norfolk. Free, fixed quotes from your pictures.
- Repairs from £95
- Rust by the waste and overflow
- Cracks in an acrylic bath
About our bath repair in Ridlington
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Typical jobs include chips under the taps and rust spots around the plughole, across pressed steel enamel, roll-top & freestanding and acrylic.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Ridlington (NR28)
- Region
- Norfolk
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Ridlington
Do you cover Ridlington?
We do. Technicians travel to Ridlington from across the region, with no extra charge for travel.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Something went through my bath. Can it be fixed?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What information do you need?
Use the quote form or ring 0345 017 0787.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
How long does the repair take to cure?
Most baths can be used the following day. We confirm the time before we leave.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we work on in Ridlington
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Why repair rather than replace?
Replacing a fitted bath typically means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Same prices wherever you are
- One-year guarantee on every repair
See our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Check that an acrylic bath does not move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Put a towel in the bath if you are working above it
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
What affects the price in Ridlington
Repairs from £95. Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
Most clients in Ridlington get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Related advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Common problems we fix in Ridlington
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Get in touch if you’ve noticed any of these:
- Chips along the edge of the bath
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Chips under the taps
What to look for in a quote
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- A fixed price, and whether VAT is included
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Ridlington, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Places near Ridlington
Other services in Ridlington
Covering Ridlington
Ridlington is about 4 miles east of North Walsham, in Norfolk. We travel to clients in Ridlington and nearby villages, so there is no workshop to go to. We work in 797 places in Norfolk, from the larger towns to small villages.
We work across NR28 and the streets around it. We regularly work on streets such as The Street, North Walsham Road and Happisburgh Road. Nearby, we also work in Ridlington Street (1 mile south-east), Witton (1 mile north-west), Crostwight (1 mile south-west), Pollard Street (1 mile north) and Broomholm (2 miles north). Larger places within reach include Norwich (15 miles south-west), Sprowston (13 miles south-west), Thorpe St Andrew (14 miles south-west), North Walsham (4 miles west), Sheringham (14 miles north-west) and Taverham (15 miles south-west).
Landmarks near Ridlington
We visit homes around East Ruston Village Green and Church of St Peter. The closest station to Ridlington is North Walsham station, about 4 miles west. Other landmarks nearby include Norfolks Golden Fleece Heritage Museum (3 miles south-west) and Dilham Castle (2.9 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
