East Riding of Yorkshire · England
Bath chip & crack repair in Pollington, East Riding of Yorkshire
Local bath repair for Pollington: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Damage beneath the taps
- A failed DIY repair that is discoloured or lifting
Bath repair in Pollington without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We are frequently asked to fix a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, in acrylic, roll-top & freestanding and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Pollington (DN14)
- Area hub
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Simple care helps the repair last. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Ensure an acrylic bath is firm underfoot
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Covering Pollington
Pollington is about 6 miles north-west of Thorne, in East Riding of Yorkshire. Jobs in Pollington are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Pollington is one of 299 towns and villages in East Riding of Yorkshire we cover. Our jobs stretch from Pollington to Leeds (about 22 miles away).
We work across the DN14 postcode area. Jobs here include addresses on Main Street, Bridge Lane and Oakwood Park and the roads around them. Other places close to Pollington include Topham (2 miles south), Gowdall (2 miles north), Sykehouse (2 miles south-east), Snaith (2 miles north-east) and West Cowick (2 miles north-east). Within a short drive, we also cover Goole (9 miles east), Howden (10 miles north-east), Gilberdyke (15 miles north-east), Eggborough (4 miles north-west), Carlton (4 miles north-east) and Rawcliffe (5 miles north-east).
Near you in Pollington
Our clients here include homes close to Pollington-Balne Church of England Primary School, Church of St John the Baptist and Clifton Pre-preparatory School, among other places. Pollington’s nearest station is Snaith station, roughly 2.4 miles north-east of the centre.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- One price list for the entire UK
- Colour mixed on the day to match
- Typically one visit, start to finish
- We’ll tell you if it’s not worth repairing
Take a look at our prices page or bath cost comparison.
Prices and what affects them
Repairs from £95. There is no charge for travel to Pollington. The price depends on:
- Unusual colours or finishes
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The material
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Send pictures for a quote
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- One sharp close-up of the damage
- Natural light rather than flash
- The postcode, so we can plan the visit
- The material, if you know it
Email us a picture of the damage and a wider shot of the entire item, with your DN14 postcode, and we will reply with a fixed quote.
Common questions in Pollington
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Do you cover Pollington?
Yes. We cover the entire UK and come to Pollington and the rest of East Riding of Yorkshire. Send photos and we’ll quote, or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Do you cover the whole of East Riding of Yorkshire?
Across the UK. Our prices are the same everywhere.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Nearby places to Pollington
What else we do in Pollington
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Pollington
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take two to three hours for most chips, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the following day, the bath is ready to use.
Before we arrive
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Common problems we fix in Pollington
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
These are the problems we’re asked about most:
- Rust spots around the plughole
- Holes from dropped items
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
