Argyll and Bute · Scotland
Bath Repair for Port Askaig homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Port Askaig and across Argyll and Bute. Free, fixed quotes from your pictures.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
Bath repair at your home in Port Askaig
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. If you are dealing with scuffs and scratches in the surface and a chip where the taps sit, we can generally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Port Askaig (PA46)
- County
- Argyll and Bute
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Aftercare tips
Aftercare is simple:
- Don’t scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Port Askaig: your questions answered
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your PA46 postcode.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Covering Port Askaig
Port Askaig (Gaelic: Port Asgaig) is in Argyll and Bute. Jobs in Port Askaig are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Port Askaig is one of 118 towns and villages in Argyll and Bute where we work. You can also see our page for Glasgow, about 71 miles away.
Our visits in PA46 are booked in the same way as anywhere else. Other places close to Port Askaig include Keills (1 mile south-west), Bunnahabhain (2 miles north), Craighouse (6 miles east), Bowmore (9 miles south-west) and Port Charlotte (13 miles south-west). Some remote addresses need extra planning, so call us to arrange it.
Near you in Port Askaig
A little further out are Finlaggan Castle (2.6 miles west). Green spaces nearby include Beinn Dubh and Ardnahoe Loch.
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Port Askaig. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Port Askaig
- One-year guarantee on every repair
- Generally one visit, start to finish
- CHAS and Constructionline accredited
- Rooms protected and left tidy
See our full price list and bath cost comparison.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Open a window if you can
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Common problems we fix in Port Askaig
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
These are the problems we are asked about most:
- Chips on the rim or sides
- Impact holes in acrylic
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
Before you book anyone
- Aftercare advice
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
Honest limits
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Port Askaig
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
How we price bath repair
Prices start from £95. You will know the full cost before booking. We take into account:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
Phone pictures are fine, there is no need for anything special. Make sure they show:
- Whether it’s been repaired or coated before
- A picture taken from further back
- Any details about the material
- Natural light rather than flash
Most clients in Port Askaig get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Towns and villages near Port Askaig
What else we do in Port Askaig
About our accreditations · Every repair comes with a one-year guarantee.
