Cornwall · England

Bath Repair for Porthcurno homes

Bath repair in and around Porthcurno: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Porthcurno

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We work for landlords, letting agents and housing providers in Porthcurno as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Bath repair at your home in Porthcurno

Most of our bath repairs take a few hours, and you can typically bathe again the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include rust spots around the plughole and impact holes in acrylic, in pressed steel enamel, cast iron enamel and acrylic.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Location
Porthcurno (TR19)
Region
Cornwall
Guarantee
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Open a window if you can
  • Tell us about any previous repairs or coatings

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Get a fixed quote

Advice

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath
  • A bath that moves underfoot, until its support is fixed

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

What bath repair costs

Repairs from £95. There’s no charge for travel to Porthcurno. The price depends on:

  • Unusual colours or finishes
  • The size and number of damaged areas
  • Any earlier repairs that need removing first
  • How easy the damage is to reach

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Send photos for a quote

We price nearly every job from photos. This is what to send:

  • One sharp close-up of the damage
  • Any details about the material
  • A wider photo showing the whole bath
  • Good light, ideally daylight, without flash glare

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Where we work around Porthcurno

Porthcurno is about 7 miles south-west of Penzance, in Cornwall. Our repair technicians come to clients in Porthcurno and the surrounding area, so you don’t need to take anything anywhere. We cover 644 places across Cornwall, from the larger towns to small villages.

All of TR19 is covered, from the main roads to the quietest streets. Local streets include The Valley and Old Cable Lane, and we cover them all. We also travel to St Levan (1 mile south), Trethewey (1 mile north), Polgigga (1 mile north-west), Bottoms (1 mile north) and Treen (1 mile east). Within a short drive, we also cover Penzance (7 miles north-east), Hayle (15 miles north-east), St Ives (14 miles north-east), Porthleven (15 miles east), Newlyn (6 miles north-east) and Carbis Bay (13 miles north-east).

Near you in Porthcurno

Our customers here include homes close to St Levan's Church and St Levan Primary School and the streets around them. Nearby you will also find Museum of Global Communications (under half a mile south-east). Green spaces nearby include Chapel Carn Brea.

Map of Porthcurno © OpenStreetMap contributors

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

How to care for the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Don’t scrub with anything abrasive
  • Get a dripping tap fixed promptly
  • Give the bath a quick rinse after use
  • Make sure an acrylic bath is firm underfoot

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

FAQs for Porthcurno

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

Can you redo an old repair?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

Is repairing better than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do you work for landlords and businesses?

Yes, often. We can quote for several properties together and work between tenancies.

Can you price it without visiting?

Nearly always. If pictures don’t show enough, we’ll ask for another angle.

How long before I can use the bath?

Most baths can be used the following day. We confirm the time before we leave.

Common problems we fix in Porthcurno

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

The most common problems we are called about are:

  • Cracks in an acrylic bath
  • Scuffs and scratches in the surface
  • Damage done while the bathroom was being fitted
  • A chipped rim or side

Questions to ask before you book

  • How long it needs to cure
  • A fixed price, and whether VAT is included
  • What protection goes down before work starts
  • How long the guarantee is and what it covers

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.