Highland · Scotland
Bath Repair for Portree homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Portree, with a one-year guarantee on every repair.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
Signs you need bath repair in Portree
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Send us a picture if you notice any of these:
- Rust spots around the plughole
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Chips on the rim or sides
Comparing quotes
- How soon you can use it again
- How the colour is matched
- What protection goes down before work starts
- How long the guarantee is and what it covers
Bath repair in Portree, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s damage done while the bathroom was being fitted and an old repair that has yellowed or come loose, we can help.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Portree (IV51)
- Area hub
- Highland
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Portree
Portree (Gaelic: Port Rìgh) is in Highland. We travel to customers in Portree and the surrounding area, so nothing has to leave your home. Portree is one of 253 towns and villages in Highland where we work.
Every address in IV51 is within our area, from the main roads to the quietest streets. Local streets include Somerled Square, Viewfield Square and Ionad Mharsco, all of which we cover. We also travel to An t-Ollach (4 miles south-east), Inverarish (7 miles south-east), Coillore (9 miles south-west), Clachamish (9 miles north-west) and Carbost (10 miles south-west). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Portree
Locally, our jobs take us to homes close to Cuillin Hills Hotel, Bun-sgoil Ghàidhlig Phort Righ and Portree High School, among other places. Other landmarks nearby include Portree Hospital (less than half a mile south). The countryside around Portree includes Loch Fada.
Prices and what affects them
Repairs from £95. There’s no area surcharge for Portree. The price reflects:
- Access to the area
- The material
- The size and number of damaged areas
- Whether we combine several jobs
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
When you take your pictures, a few simple things make all the difference:
- A wider photo showing the whole bath
- Where you are, by postcode
- Something in shot to show the size
- The material, if you know it
The quickest way to a price is to send a couple of photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We clean up when we are done and tell you when it’s ready to use.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Questions from Portree
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Are there extra charges for Portree?
We do not add a call-out fee. The fixed price covers the visit and the work.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Which areas do you work in?
All of Highland, and the rest of the UK. There’s no extra charge for travel.
Places near Portree
Other services in Portree
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlords, agents and businesses in Portree
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Portree, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Repair or replace: which is better?
Replacing a fitted bath normally means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Portree
- Honest advice, even when it means no job
- No need to remove anything
- Colour mixed on the day to match
- One visit for most repairs
Read our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
