West Sussex · England
Bath Repair for Pound Hill homes
Fixed-price bath repair in Pound Hill and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- A kit repair that didn’t last
- Deep scratches in acrylic
How we handle bath repair in Pound Hill
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about scuffs and scratches in the surface and chips along the edge of the bath.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Pound Hill (RH10)
- Area hub
- West Sussex
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Pound Hill. The price reflects:
- What the surface is made of
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The type of damage
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- The material, if you know it
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
Upload a photo of the damage and a wider shot of the entire item, with your RH10 postcode, and we will come back with a fixed quote.
How to look after the repair
It’s all simple stuff:
- Get a dripping tap fixed promptly
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Your questions about bath repair in Pound Hill
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
How do I get a price for bath repair in Pound Hill?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you repair a hole in a bath?
Normally. Send us a photo of the hole and one from under the bath if you can.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
How long does the repair take to cure?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
Repairing versus replacing in Pound Hill
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Work done at your home or business
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- No need to remove anything
Take a look at our pricing or bath cost comparison.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Do you need bath repair in Pound Hill?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a photo if you notice any of these:
- Rusty patches near the plughole
- A kit repair that didn’t last
- Holes from dropped items
- A chipped rim or side
Questions to ask before you book
- What prep work is covered
- How to care for the finish
- How the colour is matched
- If travel is included in the price
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It usually takes a few hours, depending on the damage, and you can get on with other things while we are there.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Let us know if it has been repaired before
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Covering Pound Hill
Pound Hill is about 2 miles north-east of Crawley, in West Sussex. Clients in Pound Hill get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Pound Hill is one of 371 towns and villages in West Sussex we cover. Our jobs stretch from Pound Hill to London (about 26 miles away).
Our visits in RH10 work the same way as everywhere else we cover. From Worth Road, Burns Road and Milton Road or anywhere nearby, a technician can come to you. Other places close to Pound Hill include Worth (1 mile south), Three Bridges (1 mile south-west), Forge Wood (1 mile north), Maidenbower (1 mile south) and Copthorne (1 mile north-east). Larger places within reach include Horsham (8 miles south-west), Haywards Heath (9 miles south), Burgess Hill (11 miles south), East Grinstead (6 miles east), Broadfield (3 miles south-west) and Billingshurst (15 miles south-west).
Landmarks near Pound Hill
Typical jobs here are in homes near Pound Hill Infant Academy, Hazelwick School and Hillside Inn. Other local landmarks include Worth Park Gardens (under half a mile north), The Gatwick School (1.3 miles north-west) and St Barnabas' (under half a mile south-west). The nearest railway station is Three Bridges station, about 0.6 miles south-west. Nearby you’ll also find County Mall (1.7 miles west) and Langley Green Hospital (2 miles west). The countryside around Pound Hill includes Tilgate Lake.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Also near Pound Hill
Also in Pound Hill
About our accreditations · Every repair comes with a one-year guarantee.
