Kent · England

Bath Repair for Pratling Street homes

We travel to Pratling Street for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Rust spots around the plughole
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Pratling Street

How we handle bath repair in Pratling Street

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s hairline or through cracks in acrylic and chips under the taps, we can help, on roll-top & freestanding, acrylic and pressed steel enamel alike.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Pratling Street (ME20)
County
Kent
Guarantee
12 months on all our work
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

For landlords and businesses

Landlords, letting agents and housing providers in Pratling Street use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Cover the bath during DIY or decorating
  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it
  • Fix dripping taps early to stop staining and limescale

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

Do you need bath repair in Pratling Street?

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

The things customers generally mention when they call are:

  • Rust by the waste and overflow
  • Holes from dropped items
  • A kit repair that didn’t last
  • Scuffs and scratches in the surface

What your quote should include

  • Is the price fixed, and does it include VAT?
  • Whether there are any call-out or travel charges
  • Whether cleaning and preparation are in the price
  • How soon you can use it again

10 questions to ask before you book

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Metal that has corroded all the way through
  • Leaking fittings, which need a plumber

If in doubt, send photos and we’ll say what we think.

Materials we work on in Pratling Street

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths

Pratling Street and nearby

Pratling Street is about 3 miles north-west of Maidstone, in Kent. Across the ME20 area, a technician comes to you. Pratling Street is one of 922 towns and villages in Kent where we work. Our jobs stretch from Pratling Street to London (29 miles away).

Every address in ME20 is within our area. Streets in the area include Old Mill Lane, Pratling Street and St Michaels Close, all of which we cover. Other places close to Pratling Street include Forstal (1 mile south-west), Eccles (1 mile north-west), Burham (2 miles north-west), New Hythe (2 miles west) and Larkfield (2 miles west). Within a short drive, we also cover Maidstone (3 miles south-east), Sittingbourne (11 miles east), Dartford (15 miles north-west), Sevenoaks (14 miles west), Royal Tunbridge Wells (15 miles south-west) and Gravesend (10 miles north-west).

Local landmarks in Pratling Street

In Pratling Street, that means homes near The Bush pub, St Peter's Church of England Primary School and Aylesford School. Also close by are Methodist Church Including Sunday School (0.6 miles west) and Tyland Barn (0.8 miles east). Pratling Street’s nearest station is Aylesford station, about 1.4 miles west of the centre. Nearby you’ll also find Fremlin Walk (2.4 miles south-east) and Allington Castle (1.1 miles south-east). Open spaces near Pratling Street include Burham Down and Boxley Hills.

Map of Pratling Street © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:

  • Unusual colours or finishes
  • Any earlier repairs that need removing first
  • What the surface is made of
  • How many items we do on one visit

Our prices are the same across the UK, so there is no premium for Pratling Street. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed price

You can normally get a fixed price without us visiting. To help us price it:

  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • A picture taken from further back

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the day after.

Getting ready for the visit

  • Keep a parking space free if you can
  • Let us know if it has been repaired before
  • Keep children and pets away from the room on the day

Ask for a price

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Pratling Street: your questions answered

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Which areas do you work in?

The entire UK, including all of Kent. Just include your postcode and we will offer you dates.

What about rust by the waste?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Something went through my bath. Can it be fixed?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

When can I have a bath again?

Usually within a day, depending on the repair.

Can you repair several things at once?

Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.

Do you cover Pratling Street?

We do. Technicians travel to Pratling Street from across the region, with no extra charge for travel.

It’s been repaired before. Can you still fix it?

Normally, yes. We remove the old repair before doing a new one.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.