Carmarthenshire · Wales
Bath chip & crack repair in Pwll, Carmarthenshire
Local bath repair for Pwll: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips caused by builders
- Rust spots around the plughole
Honest limits
A repair isn’t right for every job, for example:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
About our bath repair in Pwll
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you’re dealing with damage beneath the taps and chips along the edge of the bath, we can help, on whirlpool & spa baths, acrylic and cast iron enamel alike.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Pwll (SA15)
- Area hub
- Carmarthenshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Pwll
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Pwll use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- How much damage there is
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from pictures
Phone photos are fine. Just ensure we can see:
- Details of any past repairs
- Where you are, by postcode
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About Pwll
Pwll is about 2 miles west of Llanelli, in Carmarthenshire. Customers in Pwll get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Pwll is one of 195 towns and villages in Carmarthenshire we cover.
Our visits in SA15 are booked in the same way as anywhere else. Whether you live on Penllech, Tyle Catherine and Elgin Road or anywhere nearby, a technician can come to you. Other places close to Pwll include Achddu (2 miles west), Y Graig (2 miles west), Burry Port (2 miles west), Furnace (2 miles west) and Pembrey and Burry Port Town (3 miles west). Further out, we also cover Carmarthen (13 miles north), Ammanford (12 miles north-east), Box (3 miles east), Capel (3 miles east), Betws (12 miles north-east) and Pen-y-fan (3 miles east).
Local landmarks in Pwll
Our customers here include homes close to Ysgol Gyfun y Strade, The Colliers Arms and Pwll C.P. Mixed School. For rail, the closest station is Pembrey & Burry Port station, roughly 2 miles west of the centre. Nearby you will also find Parc Howard Museum (1.9 miles east) and Prince Philip Hospital (2.9 miles east). Open spaces near Pwll include WWT Llanelli Wetland Centre and Pen Waun Twmpath.
Do you need bath repair in Pwll?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Send us a photo if you notice any of these:
- Snagging damage from a refit
- Chips under the taps
- A chipped rim or side
- Rust spots around the plughole
Questions to ask before you book
- Who turns up on the day
- What aftercare is recommended
- How changes to the job are handled
- How long it needs to cure
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. It normally takes a few hours.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Ask for a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say immediately whether it can be repaired.
Related advice
Pwll: your questions answered
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What areas do you cover?
Everywhere in the UK, Pwll included. There is no extra charge for travel.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Pwll clients choose us
- Everything repaired in place
- Colour mixed on the day to match
- Fixed prices from your pictures
- We come to you, anywhere in the UK
Read our pricing and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What else we do in Pwll
About our accreditations · Every repair comes with a one-year guarantee.
