Glasgow · Scotland
Bath chip & crack repair in Queenslie, Glasgow
Chip and crack repairs to enamel, acrylic and cast iron baths in Queenslie, carried out at your home and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Bath repair in Queenslie, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, usually in a single visit. Our repair technicians work on roll-top & freestanding, acrylic and pressed steel enamel, and common reasons people contact us are impact holes in acrylic and a chip where the taps sit.
Every repair comes with a one-year guarantee.
- Location
- Queenslie (G33, G32, G34)
- Area hub
- Glasgow
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Queenslie
Other services in Queenslie
Common questions in Queenslie
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you repair a hole in a bath?
Usually. Send us a photo of the hole and one from under the bath if you can.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens next?
You will get a fixed quote back. There is no obligation to book.
Repair or replace in Queenslie?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- No need to remove anything
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
What affects the price in Queenslie
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Unusual colours or finishes
- How easy the damage is to reach
- The material
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- What it’s made of, if you know
Most customers in Queenslie get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Where we work around Queenslie
Queenslie is about 3 miles north of Cambuslang, in Glasgow. Across the G33 area, we carry out the work at your property. We work in 183 places in Glasgow.
Our visits in G33, G32 and G34 work the same way as everywhere else we cover. Whether you live on Blyth Road, Stepps Road and Monach Road or anywhere nearby, we can come to you. If you are just outside Queenslie, we cover Wellhouse (1 mile south-east), Garthamlock (1 mile north), Provanhall (1 mile north-east), Barlanark (1 mile south) and Springboig (1 mile south-west). Within a short drive, we also cover Glasgow (5 miles west), Hillhead (6 miles west), Dowanhill (6 miles west), Woodlands (5 miles west), Woodside (5 miles west) and North Kelvinside (5 miles west).
Around Queenslie
We visit homes around Saint Benedict's Church, St Andrew's Secondary School and Glasgow and the streets around them. The nearest railway station is Garrowhill station, about 0.9 miles south-east. Further afield, we also cover the area around Glasgow Fort (0.5 miles north-east) and Tollcross Museum (1.7 miles south-west). Green spaces nearby include Hogganfield Loch and Lenzie Moss.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
When to call us in Queenslie
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.
Signs it’s time to call us include:
- Rusty patches near the plughole
- Chips along the edge of the bath
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
What to look for in a quote
- How changes to the job are handled
- Whether the colour is mixed to match
- How long it needs to cure
- What aftercare is recommended
Keeping it looking good
To keep it looking its best:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Do not leave a fresh chip for long
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What we cannot put right
It helps to know what we cannot do too:
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It generally takes a few hours, and you can get on with other things while we are there.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
