Nottinghamshire · England
Bath chip & crack repair in Rampton, Nottinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Rampton and across Nottinghamshire. Free, fixed quotes from your photos.
- Repairs from £95
- Rust by the waste and overflow
- Chips under the taps
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our bath repair in Rampton
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. Whether it’s rust spots around the plughole and damage done while the bathroom was being fitted, we can help, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Rampton (DN22)
- County
- Nottinghamshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Looking after the surface is easy:
- Check that an acrylic bath does not move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a few hours, depending on the damage, including clearing up.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Ensure the area is dry
- Point us to the nearest place to park
- Let us know about parking or access
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Nearby places to Rampton
Other services in Rampton
What we’re called out for in Rampton
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
The most common problems we’re called about are:
- An old repair that has yellowed or come loose
- A chipped rim or side
- Deep scratches in acrylic
- Cracks in an acrylic bath
What your quote should include
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- How soon you can use it again
- How long the guarantee is and what it covers
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. We charge the same wherever you are, so there is no premium for Rampton. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Straight answers about what a repair can do
- Free fixed quotes from pictures
- One visit for most repairs
- CHAS and Constructionline accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Rampton questions
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Are there extra charges for Rampton?
Travel is included in the price, and we charge the same wherever you are.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
How we price bath repair
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Where you are, by postcode
- A close-up of the damage, in focus
- What it’s made of, if you know
- Something in shot to show the size
To get a price, send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
About Rampton
Rampton is about 6 miles east of Retford, in Nottinghamshire. We visit clients in Rampton and the surrounding area, so you do not need to take anything anywhere. We cover all 329 towns and villages in Nottinghamshire, from the larger towns to small villages. Our nearest city page is Leeds, about 47 miles away.
Postcode districts we cover here: DN22. We regularly work on streets such as Main Street, The Pastures and Greenside Avenue and the roads around them. Other places close to Rampton include Stokeham (1 mile south-west), Woodbeck (2 miles west), East Drayton (3 miles south-west), Ragnall (3 miles south) and Headon (3 miles west). Further out, we also cover Worksop (13 miles west), Newark-on-Trent (15 miles south), Retford (6 miles west), New Ollerton (10 miles south-west), Kilton (13 miles west) and Edwinstowe (13 miles south-west).
Local landmarks in Rampton
Typical jobs here are in homes near Eyre Arms, Church of All Saints and Rampton Primary School, among other places. Nearby you will also find Rampton Secure Hospital (1.5 miles west) and Grove Castle Hill (3.9 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
