Cambridgeshire · England
Bath Repair in Ramsey Hollow
Bath repair in and around Ramsey Hollow: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
Your questions about bath repair in Ramsey Hollow
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Bath repair in Ramsey Hollow, done in place
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Our technicians work on whirlpool & spa baths, acrylic and cast iron enamel, and common reasons people get in touch are damage beneath the taps and rust spots around the plughole.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Ramsey Hollow (PE26)
- County
- Cambridgeshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
It helps to know what we cannot do:
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How to look after the repair
Looking after the surface is easy:
- Have new chips seen to early
- Put a towel in the bath if you are working above it
- Rinse the bath after use, especially in hard water areas
- Do not leave razors or cans standing in the bath
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
How the visit works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It typically takes a few hours, depending on the damage, and you can get on with other things while we’re there.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the next day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
Landlord and trade work in Ramsey Hollow
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in one visit. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Ramsey Hollow. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Ramsey Hollow clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Normally one visit, start to finish
See our full price list and resurfacing vs replacement cost guide.
Towns and villages near Ramsey Hollow
What else we do in Ramsey Hollow
About Ramsey Hollow
Ramsey Hollow is about 8 miles south of Whittlesey, in Cambridgeshire. Whether you are in the middle of Ramsey Hollow or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Ramsey Hollow is one of 371 towns and villages in Cambridgeshire where we work. We work right across the region, from Ramsey Hollow to London (66 miles away).
Here we cover the PE26 postcode area. Close by, we cover Ramsey Forty Foot (1 mile north-west), Benwick (3 miles north-east), Warboys (4 miles south), Swingbrow (4 miles north-east) and Chatteris (4 miles east). Larger places within reach include Huntingdon (10 miles south-west), St Ives (9 miles south), Ely (14 miles east), March (9 miles north-east), Whittlesey (8 miles north) and Godmanchester (11 miles south-west).
Near you in Ramsey Hollow
Our customers here include homes close to Abbey College, among other places. Further afield, we also cover the area around Ramsey Rural Museum (1.7 miles west). The countryside around Ramsey Hollow includes Pingle Wood and Cutting.
What bath repair costs
Prices start from £95. Prices are worked out job by job. The main factors are:
- The type of damage
- How much damage there is
- Access to the area
- Doing more than one item at once
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
You can normally get a fixed price without us visiting. To make it quick:
- A wider photo showing the whole bath
- Details of any past repairs
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
