Cambridgeshire · England
Bath Re-enamelling in Ramsey Hollow
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Ramsey Hollow. Send photos for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that is failing
About our bath re-enamelling in Ramsey Hollow
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. Our technicians work on Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and a bath in a colour that no longer suits.
We stand behind the work with a one-year guarantee.
- Location
- Ramsey Hollow (PE26)
- Region
- Cambridgeshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why book with us
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- One visit for most repairs
- Fixed prices from your pictures
Read our prices page and bath cost comparison.
Do you need bath re-enamelling in Ramsey Hollow?
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
The things clients typically mention when they call include:
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
What your quote should include
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- How to care for the finish
- How your room will be protected
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Ramsey Hollow and the surrounding area
Ramsey Hollow is about 8 miles south of Whittlesey, in Cambridgeshire. Whether you’re in the middle of Ramsey Hollow or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 371 places in Cambridgeshire. Our jobs stretch from Ramsey Hollow to London (66 miles away).
Postcode districts we cover here: PE26. We also cover the places around Ramsey Hollow: Ramsey Forty Foot (1 mile north-west), Benwick (3 miles north-east), Warboys (4 miles south), Swingbrow (4 miles north-east) and Chatteris (4 miles east). Further out, we also cover Huntingdon (10 miles south-west), St Ives (9 miles south), Ely (14 miles east), March (9 miles north-east), Whittlesey (8 miles north) and Godmanchester (11 miles south-west).
Around Ramsey Hollow
Locally, our jobs take us to homes close to Abbey College. Further afield, we also cover the area around Ramsey Rural Museum (1.7 miles west). Not far away are Pingle Wood and Cutting.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
Looking after the surface is easy:
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Also near Ramsey Hollow
What else we do in Ramsey Hollow
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take most of the day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Ramsey Hollow questions
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you work in Ramsey Hollow?
Yes. We work across the UK and come to Ramsey Hollow. Send us photos for a fixed quote, or call 0345 017 0787.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How hard the colour is to match
- The size and number of damaged areas
- Doing more than one item at once
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- One picture of the whole bath
- Any details about the material
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
