Sheffield · England

Bath Repair in Ranmoor

Chip and crack repairs to enamel, acrylic and cast iron baths in Ranmoor, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A chip where the taps sit
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Ranmoor?

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Bath repair in Ranmoor without replacing anything

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. We regularly repair whirlpool & spa baths, cast iron enamel and pressed steel enamel, and people most frequently call us about scuffs and scratches in the surface and a chip where the taps sit.

All our work is covered by our one-year guarantee.

Area
Ranmoor (S10, S11)
Region
Sheffield
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Repair or replace: which is better?

Many people think a damaged bath means a new one. Normally it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Ranmoor. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • Every repair guaranteed for a year
  • Colour mixed on the day to match
  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing and resurfacing vs replacement cost guide.

What bath repair costs

Prices start from £95. We don’t charge extra for travel to Ranmoor. The price comes down to:

  • The material
  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • How hard the colour is to match

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from pictures

Good pictures mean an accurate price. Here’s what helps:

  • A wider photo showing the entire bath
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates

Most clients in Ranmoor get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

When a repair isn’t the answer

Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

When to call us in Ranmoor

Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

People generally call us after spotting something like this:

  • Impact holes in acrylic
  • Rust spots around the plughole
  • Chips under the taps
  • Deep scratches in acrylic

Before you book anyone

  • How changes to the job are handled
  • Whether cleaning and preparation are in the price
  • How the colour is matched
  • What aftercare is recommended

Choosing a repair company

Keeping it looking good

Nothing complicated is needed:

  • A dripping tap stains enamel, so fix it early
  • Don’t leave a fresh chip for long
  • Ensure an acrylic bath is firm underfoot
  • Keep abrasive pads and gritty cleaners away from the bath

Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Open a window if you can
  • Move bottles, mats and clutter away from the area

Getting a price

For a price in Ranmoor, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Read more

Ranmoor and nearby

Ranmoor is about 2 miles west of Sheffield, in Sheffield. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Ranmoor is one of 118 places in Sheffield where we work. You can also see our page for Manchester, about 29 miles away.

Postcode districts we cover here: S10 and S11. Jobs here include addresses on Tom Lane, Cow Lane and Watt Lane. Close by, we cover Crosspool (1 mile north), Sandygate (1 mile north-west), Fulwood (1 mile south-west), Broomhill (1 mile east) and Hallam Head (1 mile west). Further out, we also cover Chapeltown (7 miles north), Neepsend (3 miles north-east), Carbrook (5 miles east), Hackenthorpe (6 miles east), Heeley (3 miles east) and Woodthorpe (5 miles east).

Near you in Ranmoor

Locally, our jobs take us to homes close to Tapton Mount School, St John's Church and University of Sheffield Library, among other places. Also close by are Nether Green Junior School (under half a mile south-west), Notre Dame High School (within half a mile east) and Chelsea Park (1.4 miles south-east). The nearest railway station is Sheffield station, roughly 2.6 miles east of the centre. A little further out are Sheffield Castle (2.7 miles east) and Shepherd Wheel (0.5 miles south). Not far away are Fox Hagg and Burbage Rocks.

  • Parks and local facilities nearby include Ecclesall Bierlow (1.1 miles south-east)
Map of Ranmoor © OpenStreetMap contributors

FAQs for Ranmoor

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

I tried a repair kit. Can you fix it?

Yes, we do this often. We strip it out, deal with any rust and repair it again.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

How do I get a price for bath repair in Ranmoor?

Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your S10 postcode.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.

Is a holed acrylic bath repairable?

Normally. Photos of the hole and the underside help us check.

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.