East Sussex · England

Bath Repair for Ratton Village homes

Damaged bath in Ratton Village? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • A cracked acrylic bath
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Ratton Village

Bath repair in Ratton Village, done in place

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We work on acrylic, cast iron enamel and pressed steel enamel, and people most frequently call us about deep scratches in acrylic and snagging damage from a refit.

Every repair comes with a one-year guarantee.

Where
Ratton Village (BN20, BN21, BN22)
County
East Sussex
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Keeping it looking good

To keep it looking its best:

  • Don’t leave razors or cans standing in the bath
  • Cover the bath during DIY or decorating
  • Don’t scrub with anything abrasive
  • Check that an acrylic bath does not move when you stand in it

There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

How we price bath repair

Repairs from £95. We don’t charge extra for travel to Ratton Village. The price depends on:

  • How many items we do on one visit
  • The size and number of damaged areas
  • What the surface is made of
  • Where the damage is and how we get to it

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Quotes from your pictures

Photographing the damage takes a minute. Try to send:

  • What it’s made of, if you know
  • A wider photo showing the entire bath
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Where we work around Ratton Village

Ratton Village is about 2 miles west of Eastbourne, in East Sussex. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 289 towns and villages in East Sussex, from the larger towns to small villages. You can also see our page for London, about 51 miles away.

All of BN20, BN21 and BN22 is covered, from the main roads to the quietest streets. Whether you live on Park Lane, Butts Lane and Ruskin Road or a nearby road, we can come to you. With the A2270 close by, Ratton Village is simple for us to get to. We also cover the places around Ratton Village: Hampden Park (1 mile east), Old Town (1 mile south), Eastbourne (2 miles east), Upperton (2 miles south-east) and Jevington (2 miles west). Further out, we also cover Hastings (14 miles east), Bexhill-on-Sea (10 miles north-east), Seaford (6 miles west), Lewes (12 miles north-west), Hailsham (5 miles north) and St Leonards (14 miles east).

Around Ratton Village

Around Ratton Village, we work in homes near Ratton School, Gildrege Park and The Red Lion pub. Nearby too are The Parish Church of St Mary the Virgin (0.5 miles north) and Ocklynge Junior School (within half a mile south). For rail, the closest station is Hampden Park station, about 1.2 miles east of the centre. Well-known places in the area include Filching Manor And Motor Museum (1.6 miles north-west) and Eastbourne District General Hospital (0.7 miles south-east). Green spaces nearby include Combe Hill.

Map of Ratton Village © OpenStreetMap contributors

What happens on the day

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can usually use the bath the next day.

How to prepare

  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing
  • Let the surface dry out before the visit

Ask for a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Advice

What we can’t put right

We’d rather lose a job than do one that won’t last, so these are the limits:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Water coming from the waste or taps rather than the bath
  • Acrylic cracks with no access behind them

If in doubt, send photos and we’ll say what we think.

Materials we work on in Ratton Village

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic

Common problems we fix in Ratton Village

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Clients normally contact us about:

  • Scratches you can feel with a fingernail
  • A chip where the taps sit
  • Chips along the edge of the bath
  • Impact holes in acrylic

What to look for in a quote

  • Whether the colour is mixed to match
  • What happens if the damage is worse than the photos show
  • Whether the price covers travel
  • Who turns up on the day

How to compare quotes

Repair or replace in Ratton Village?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Ratton Village customers choose us

  • One price list for the entire UK
  • Free fixed quotes from pictures
  • A year’s guarantee on all work
  • No need to remove anything

See our pricing or resurfacing vs replacement cost guide.

Ratton Village questions

What happens after I send photos?

We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Will I be able to see the repair?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.