St Helens · England
Bath Repair in Ravenhead
Bath repair in Ravenhead without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- Snagging damage from a refit
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
How we handle bath repair in Ravenhead
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you’re dealing with an old repair that has yellowed or come loose and damage done while the bathroom was being fitted, we can normally put it right, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Ravenhead (WA10, WA9)
- Region
- St Helens
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. We do not charge extra for travel to Ravenhead. The price comes down to:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- The material
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Any details about the material
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. You can expect it to take two to three hours for most chips, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Make sure the room can be ventilated
- Make sure the area is dry
- Keep children and pets away from the room on the day
How to get a price
Most clients in Ravenhead get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
What we are called out for in Ravenhead
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a picture:
- Chips caused by builders
- Impact holes in acrylic
- A chipped rim or side
- A kit repair that didn’t last
Before you book anyone
- What aftercare is recommended
- What prep work is covered
- Whether the price is fixed and includes VAT
- Who will actually do the work
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Your questions about bath repair in Ravenhead
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Are there extra charges for Ravenhead?
Travel is included in the price, with the same prices everywhere we work.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Places near Ravenhead
More services for Ravenhead
What we can’t put right
A repair is not always the answer, and we’d rather say so up front. We cannot fix:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Repair or replace in Ravenhead?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Ravenhead customers choose us
- Usually one visit, start to finish
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or resurfacing vs replacement cost guide.
About Ravenhead
Ravenhead is about 1 mile south-west of St Helens, in St Helens. Wherever you are in the WA10 postcode area, a technician comes to you. Ravenhead is one of 32 towns and villages in St Helens we cover. Our nearest city page is Liverpool, about 8 miles away.
All of WA10 and WA9 is covered, from the main roads to the quietest streets. That includes homes on Elm Road, Kings Road and Leslie Road and the roads around them. We also cover the places around Ravenhead: West Park (1 mile north-west), Thatto Heath (1 mile south), St Helens (1 mile north-east), Eccleston (1 mile north-west) and Eccleston Park (2 miles south-west). Further out, we also cover Newton-le-Willows (5 miles east), Haydock (4 miles north-east), Earlestown (4 miles east), Rainford (4 miles north), Blackbrook (3 miles north-east) and New Boston (4 miles north-east). Ravenhead is one of the larger places we cover in St Helens.
Around Ravenhead
Typical jobs here are in homes near Bird i'th Hand pub, Carmel College and St John the Evangelist. Other local landmarks include Gamble Institute (1 mile north-east), Thatto Heath Community Primary School (0.5 miles south) and Thatto Heath Park (within half a mile south-west). For rail, the closest station is Thatto Heath station, about 0.5 miles south-west of the centre. Further afield, we also cover the area around Prescot Shopping Centre (2.3 miles south-west) and St Helens Hospital (1.4 miles east). Not far away are Billinge Hill.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
