St Helens · England

Bath chip & crack repair in Parr, St Helens

Bath repair for Parr, without a refit. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • A kit repair that didn’t last
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Parr

How we handle bath repair in Parr

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. We’re often asked to fix scuffs and scratches in the surface and damage done while the bathroom was being fitted, in acrylic, whirlpool & spa baths and pressed steel enamel.

We stand behind the work with a one-year guarantee.

Rusty chip next to a bath plughole, before and after repair
Location
Parr (WA9, WA10, WA11)
County
St Helens
Warranty
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Parr

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

Most people get in touch after spotting something like this:

  • Rust spots around the plughole
  • An old repair that has yellowed or come loose
  • Snagging damage from a refit
  • Chips on the rim or sides

Comparing quotes

  • How long it needs to cure
  • What prep work is covered
  • How the colour is matched
  • What protection goes down before work starts

Choosing a repair company

Covering Parr

Parr is about 1 mile east of St Helens, in St Helens. Jobs in Parr are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover 32 places in St Helens. Our jobs stretch from Parr to Liverpool (9 miles away).

Our visits in WA9, WA10 and WA11 are booked in the same way as anywhere else. Streets in the area include Park Road, Sutton Road and Varley Road, and we cover them all. We also travel to Broad Oak (1 mile east), St Helens (1 mile west), Sutton (1 mile south-east), Laffak (1 mile north) and Ravenhead (2 miles west). We also work in nearby towns such as Prescot (4 miles south-west), Newton-le-Willows (3 miles east), Earlestown (3 miles east), Rainhill (3 miles south-west), Rainford (5 miles north-west) and Eccleston Park (3 miles south-west). As one of the bigger places in St Helens, Parr sees plenty of our work.

Around Parr

In Parr, that means homes near Finger Post Hotel, Gamble Institute and Holy Trinity Church and the streets around them. Also close by are Allanson Street Primary School (less than half a mile south), Sutton Brook Greenway (less than half a mile north-east) and St Augustine of Canterbury Catholic High School (0.6 miles north-east). The nearest railway station is St Helens Central station, roughly 0.6 miles west of the centre. Nearby you’ll also find St Helens Hospital (0.8 miles south) and World of Glass (0.8 miles west). Not far away are Billinge Hill.

Map of Parr © OpenStreetMap contributors

The process

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Make sure the area is dry
  • Mention any earlier repairs or resurfacing
  • Have a window or extractor fan available

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed quote

Related advice

What affects the price in Parr

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • How many items we do on one visit
  • The colour and finish to match
  • The material and finish
  • Previous DIY repairs that have to come out

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your pictures

A couple of clear pictures is all it takes. Try to include:

  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • One picture of the entire bath
  • The postcode, so we can plan the visit

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Put a towel in the bath if you’re working above it
  • Clean with warm water and a mild detergent
  • If an acrylic bath flexes, have its feet adjusted
  • Keep abrasive pads and gritty cleaners away from the bath

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

FAQs for Parr

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across St Helens.

Will I be able to see the repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

How much does bath repair cost in Parr?

Repairs from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your WA9 postcode.

Is a holed acrylic bath repairable?

Often, if there is access underneath. We back the hole, fill it and refinish the surface.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

Landlord and trade work in Parr

Landlords, letting agents and housing providers in Parr use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

What your bath is made of matters

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

When we would advise against a repair

We will not take on work that won’t last, so these are the limits:

  • Metal that has corroded all the way through
  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.