Dudley · England

Bath Repair for Ridge Hill homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Ridge Hill, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Ridge Hill

When we would advise against a repair

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Rust that has eaten right through a steel bath
  • Wear across the entire surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel

Bath repair in Ridge Hill, done in place

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you’re dealing with chips along the edge of the bath and chips under the taps, we can help, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.

Whatever the size of the job, you get the same one-year guarantee in Ridge Hill and across Dudley.

Location
Ridge Hill (DY8)
County
Dudley
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

The process

We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Open a window if you can
  • Let us know which floor the room is on
  • Keep a parking space free if you can

Get a quote

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.

Get a fixed quote

Related advice

When to call us in Ridge Hill

Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

These are the problems we are asked about most:

  • A chipped rim or side
  • Rust spots around the plughole
  • Scratches you can feel with a fingernail
  • Chips under the taps

What to look for in a quote

  • How your room will be protected
  • The length of the guarantee and what it covers
  • How to care for the finish
  • Is the price fixed, and does it include VAT?

Choosing a repair company

Prices and what affects them

Repairs from £95. We charge the same across the UK, including Ridge Hill. What changes the price is:

  • What the surface is made of
  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out

The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • Daylight if possible, and no flash reflection
  • One picture of the entire bath
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

FAQs for Ridge Hill

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

How much does bath repair cost in Ridge Hill?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Do you come to Ridge Hill?

Yes. We cover the entire UK and travel to Ridge Hill and the rest of Dudley. Send us pictures for a fixed quote, or call 0345 017 0787.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

When can I have a bath again?

Normally the following day. We confirm the time before we leave.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send photos.

About Ridge Hill

Ridge Hill is about 1 mile south of Kingswinford, in Dudley. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover all 63 towns and villages across Dudley, from the larger towns to small villages. You can also see our page for Birmingham, about 11 miles away.

We work across the DY8 postcode area. We also travel to Bromley (1 mile north-east), Kingswinford (1 mile north), Lawns Wood (1 mile west), New Wood (1 mile south-west) and Brierley Hill (1 mile south-east). We also work in nearby towns such as Dudley (3 miles north-east), Halesowen (5 miles south-east), Sedgley (3 miles north), Milking Bank (3 miles north-east), Hasbury (4 miles south-east) and Eve Hill (3 miles north-east).

Near you in Ridge Hill

Around Ridge Hill, we work in homes near Samson and Lion pub, The Wordsley School and The Crestwood School. Nearby too are Dingle Community Primary School (under half a mile north-east), Holy Trinity Church (less than half a mile south-west) and Buckpool and Fens Pool Local Nature Reserve (1.2 miles north-east). For rail, the closest station is Stourbridge Town station, roughly 1.9 miles south. Nearby you will also find Stourton Castle (2.7 miles south-west) and Merry Hill Shopping Centre (1.8 miles east). Green spaces nearby include Stourton Pit and Wychbury Hill.

Map of Ridge Hill © OpenStreetMap contributors

Repair or replace in Ridge Hill?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Ridge Hill. The job itself decides the price: how much damage, what it’s made of and how many items.

Why us?

  • A fixed quote before booking
  • Colour mixed on the day to match
  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything

See our full price list and bath cost comparison.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Repairs by material

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

How to look after the repair

After the repair has cured, a few habits help it last:

  • Get a dripping tap fixed promptly
  • Keep abrasive pads and gritty cleaners away from the bath
  • Keep metal cans and razors off the surface
  • Have new chips seen to early

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.