Derbyshire · England
Bath Repair for Rowsley homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Rowsley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- Holes from dropped items
Where we work around Rowsley
Rowsley is about 8 miles south-west of Chesterfield, in Derbyshire. From the centre of Rowsley to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Rowsley is one of 532 towns and villages in Derbyshire we cover. Our nearest city page is Manchester, about 32 miles away.
Here we cover the DE4 postcode area. That includes homes on Hinckley Court, Sunnybank and Chatsworth Road. Other places close to Rowsley include Stanton in Peak (2 miles south-west), Stanton Lees (2 miles south), Warrencarr (2 miles south), Alport (2 miles west) and Birchover (3 miles south-west). We also work in nearby towns such as Chesterfield (8 miles north-east), Belper (13 miles south-east), Buxton (13 miles west), Dronfield (10 miles north-east), Ripley (13 miles south-east) and Bolsover (14 miles east).
Near you in Rowsley
We visit homes around The Peacock Hotel, Church of St Katherine and Rowsley CofE (Controlled) Primary School and the streets around them. The nearest railway station is Matlock station, about 4.3 miles south-east. Well-known places in the area include Newholme Hospital (3.1 miles north-west) and Bakewell Urban District (3 miles north-west). The countryside around Rowsley includes Beeley Moor.
Bath repair in Rowsley, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We work on acrylic, roll-top & freestanding and cast iron enamel, and people most frequently call us about cracks in an acrylic bath and a hole punched through by something heavy.
We stand behind the work with a one-year guarantee.
- Location
- Rowsley (DE4)
- County
- Derbyshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Many people think a damaged bath means a new one. Usually it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Rowsley
- Colour mixed on the day to match
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
Take a look at our prices page or bath cost comparison.
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Places near Rowsley
Other services in Rowsley
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What bath repair costs
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- How many items we do on one visit
- How hard the colour is to match
- How much damage there is
- Any earlier repairs that need removing first
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
You can usually get a fixed quote without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- One picture of the entire bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
What happens on the day
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes two to three hours for most chips, and we will keep you posted as we go.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Landlords, agents and businesses in Rowsley
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
What we’re called out for in Rowsley
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
If you can see any of these, send us a photo:
- Deep scratches in acrylic
- Chips under the taps
- Cracks in an acrylic bath
- Rusty patches near the plughole
What your quote should include
- Whether the price is fixed and includes VAT
- Aftercare advice
- How long it needs to cure
- How changes to the job are handled
Rowsley: your questions answered
What happens after I send photos?
We come back with a fixed price, plus dates. You are under no obligation.
Do you come to Rowsley?
We do. We send a technician to Rowsley for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
About our accreditations · Every repair comes with a one-year guarantee.
