Derbyshire · England
Bath chip & crack repair in Belper, Derbyshire
Our repair technicians come to Belper for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- Impact holes in acrylic
What happens on the day
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the following day.
How to prepare
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
Bath repair at your home in Belper
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and common reasons people contact us are chips under the taps and rust by the waste and overflow.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Belper (DE56)
- County
- Derbyshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Repairing versus replacing in Belper
Many people think a damaged bath means a new one. Normally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Belper
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
Read our prices page or resurfacing vs replacement cost guide.
Our work in Belper
Belper is about 8 miles north of Derby, in Derbyshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Belper is one of 532 towns and villages in Derbyshire where we work. Our jobs stretch from Belper to Birmingham (42 miles away).
We cover every part of DE56 and the streets around it. From High Street, Market Place and Wheeldon Avenue or a nearby road, we can come to you. You’ll find Belper on the A6 and A517, so it’s easy for us to reach. Other places close to Belper include Chevinside (1 mile south-west), Bargate (1 mile south), Boothgate (1 mile north-east), Cinderhill (1 mile south-east) and Milford (2 miles south). Further out, we also cover Chesterfield (15 miles north), Ilkeston (8 miles south-east), Long Eaton (12 miles south-east), Heanor (5 miles east), Ripley (3 miles north-east) and Langley Mill (6 miles east). Belper is among the bigger towns we cover in Derbyshire.
Landmarks near Belper
Typical jobs here are in homes near Belper School and Sixth Form Centre, Herbert Strutt School and Church of St John the Baptist, among other places. Other local landmarks include Thorn Tree Inn (within half a mile west) and St John's CofE Primary School and Nursery (less than half a mile north-east). The closest station to Belper is Belper station, roughly 0.5 miles south-west. Nearby you’ll also find Duffield Castle (2.6 miles south) and Strutt's North Mill (0.6 miles west). For a walk, there is Wyver Lane Nature Reserve and Alport Height.
- Parks and local facilities nearby include Belper Urban District (less than half a mile north-west)
Nearby places to Belper
Also in Belper
Keeping it looking good
Looking after the surface is easy:
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Make sure an acrylic bath is firm underfoot
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Common problems we fix in Belper
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
What your quote should include
- How your room will be protected
- What the guarantee covers, and for how long
- What happens if they find more damage
- Whether the colour is mixed to match
How we price bath repair
Repairs from £95. Every quote is fixed and free. What we take into account:
- Access to the area
- How many areas need work
- The type of damage
- Whether we combine several jobs
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- A close-up of the damage, in focus
- Details of any past repairs
- Daylight if possible, and no flash reflection
- Something in shot to show the size
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Belper, and we will reply with a fixed price.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Belper
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
FAQs for Belper
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
About our accreditations · Every repair comes with a one-year guarantee.
