Greater London · England
Bath Repair for Roxbourne homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Roxbourne and across Greater London. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
FAQs for Roxbourne
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Bath repair at your home in Roxbourne
Most of our bath repairs take a few hours, and you can generally bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and chips along the edge of the bath.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Roxbourne (HA5, HA2, HA4)
- Area hub
- Greater London
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Roxbourne
What else we do in Roxbourne
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Get a quote
To get a price, send two or three photos through our quote form or ring us. We will say right away whether it can be repaired.
Read more
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
About Roxbourne
Roxbourne is about 1 mile east of Ruislip, in Greater London. We visit clients in Roxbourne, so there is no workshop to go to. We cover 764 places across Greater London. Our jobs stretch from Roxbourne to London (about 13 miles away).
Here we cover the HA5, HA2 and HA4 postcode area. Jobs here include addresses on Kings Road, The Avenue and Torbay Road. If you are just outside Roxbourne, we cover Rayners Lane (1 mile east), Eastcote (1 mile north-west), North Harrow (1 mile north-east), South Ruislip (1 mile south) and Pinner (1 mile north). Further out, we also cover London (13 miles south-east), City of Westminster (11 miles south-east), Marylebone (11 miles east), Kensington (9 miles south-east), St Pancras (12 miles east) and Shoreditch (14 miles east).
Landmarks near Roxbourne
Locally, our jobs take us to homes close to Pinner High School, The Moriah Jewish Day School and Heathfield School and the streets around them. Also close by are Eastcote House Gardens (1.2 miles north-west), Venue 5 pub (0.5 miles south-west) and St. Andrew’s Church (0.8 miles south-east). The nearest railway station is South Ruislip station, about 1.4 miles south-west. Further afield, we also cover the area around Heath Robinson Museum (1.2 miles north) and St. George's Shopping Centre (1.9 miles east). Open spaces near Roxbourne include Northala Fields and Islip Manor Meadows.
How we price bath repair
Prices start from £95. You will know the full cost before you book. We look at:
- The size and number of damaged areas
- The colour and finish to match
- Whether old repairs or coatings need taking off
- The material
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Send pictures for a quote
You can generally get a fixed price without us visiting. To help us price it:
- A picture taken from further back
- The material, if you know it
- Something in shot to show the size
- Your postcode, so we can check dates
If you are in Roxbourne and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Keeping it looking good
So the finish stays in good condition:
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave razors or cans standing in the bath
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
What we are called out for in Roxbourne
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a picture:
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
- Rusty patches near the plughole
What to look for in a quote
- Whether there are any call-out or travel charges
- What prep work is covered
- What aftercare is recommended
- When it can be used again
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Greater London and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
