Shropshire · England
Bath chip & crack repair in Ryton, Shropshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Ryton and across Shropshire. Free, fixed quotes from your photos.
- Repairs from £95
- A chipped rim or side
- Deep scratches in acrylic
About our bath repair in Ryton
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Common call-outs are for cracks in an acrylic bath and rust spots around the plughole, across acrylic, pressed steel enamel and cast iron enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Ryton (TF11)
- Area hub
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
About Ryton
Ryton is about 7 miles south-east of Telford, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 433 places across Shropshire. We work right across the region, from Ryton to Birmingham (22 miles away).
Our technicians cover all of TF11 and the streets around it. Nearby, we also work in Grindle (1 mile west), Grindleforge (1 mile north-west), Beckbury (1 mile south), Burnhill Green (2 miles south-east) and Kemberton (2 miles north-west). Within a short drive, we also cover Madeley (4 miles west), Bridgnorth (7 miles south-west), Shifnal (3 miles north), Broseley (5 miles west), Albrighton (3 miles east) and Much Wenlock (9 miles west).
Local landmarks in Ryton
Locally, our jobs take us to homes close to Seven Stars pub, St Andrew's Church and Beckbury CofE Primary School, among other places. For rail, the closest station is Cosford station, roughly 2.7 miles north-east. Well-known places in the area include RAF Hospital Cosford (3.4 miles north-east) and Ryton Castle Hillfield (less than half a mile north-west).
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Towns and villages near Ryton
Also in Ryton
FAQs for Ryton
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Ryton?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Prices and what affects them
Repairs from £95. You’ll know the full cost before you book. We look at:
- How hard the colour is to match
- Whether we combine several jobs
- How easy the damage is to reach
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- Natural light rather than flash
- One picture of the entire bath
- Details of any past repairs
- Your postcode, so we can check dates
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
What we can’t put right
A repair is not right for every job, including:
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Landlord and trade work in Ryton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Ryton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Signs you need bath repair in Ryton
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Look out for any of the following:
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- A chip where the taps sit
What your quote should include
- What protection goes down before work starts
- How changes to the job are handled
- Whether a trained technician does the job
- How long the guarantee is and what it covers
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
