Shropshire · England
Bath Repair for Grindle homes
Local bath repair for Grindle: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips on the rim or sides
- A kit repair that didn’t last
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
How we handle bath repair in Grindle
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Our repair technicians work on cast iron enamel, acrylic and pressed steel enamel, and people most frequently call us about chips caused by builders and rust by the waste and overflow.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Grindle (TF11)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Grindle
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Grindle and nearby
Grindle is about 6 miles south-east of Telford, in Shropshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Grindle is one of 433 places in Shropshire we cover. We work right across the region, from Grindle to Birmingham (about 23 miles away).
Postcode districts we cover here: TF11. Neighbouring places we cover include Grindleforge (1 mile north), Ryton (1 mile east), Beckbury (1 mile south-east), Kemberton (1 mile north-west) and Burnhill Green (3 miles south-east). Within a short drive, we also cover Madeley (3 miles west), Bridgnorth (7 miles south), Shifnal (3 miles north), Broseley (5 miles west), Albrighton (4 miles east) and Much Wenlock (8 miles west).
Landmarks near Grindle
Our clients here include homes close to St Andrew's Church. The nearest railway station is Shifnal station, roughly 2.8 miles north. A little further out are Museum of The Post Office In The Community (3.5 miles west) and RAF Hospital Cosford (3.8 miles north-east).
Repair or replace in Grindle?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Grindle. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Grindle customers choose us
- Everything repaired in place
- Same prices wherever you are
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
See our full price list and bath cost comparison.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
Towns and villages near Grindle
Also in Grindle
Do you need bath repair in Grindle?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
- Damage beneath the taps
Comparing quotes
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- How long it needs to cure
- If travel is included in the price
What bath repair costs
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- What the surface is made of
- Whether we combine several jobs
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Questions from Grindle
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you work in Grindle?
Yes, we do. We send a technician to Grindle for every job, with no extra charge for travel.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Do you cover the whole of Shropshire?
We cover the whole UK, including Grindle and the rest of Shropshire. Just include your postcode and we will offer you dates.
About our accreditations · Every repair comes with a one-year guarantee.
