Kirklees · England
Bath chip & crack repair in Salendine Nook, Kirklees
Fixed-price bath repair in Salendine Nook and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- A kit repair that didn’t last
Bath repair in Salendine Nook, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. We work on acrylic, whirlpool & spa baths and pressed steel enamel, and people most frequently call us about rusty patches near the plughole and a cracked acrylic bath.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Location
- Salendine Nook (HD3)
- Area hub
- Kirklees
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Salendine Nook
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
To keep it looking its best for years:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave a fresh chip for long
- Store metal items away from the bath
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
How we price bath repair
Prices start from £95. There’s no charge for travel to Salendine Nook. The price depends on:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Phone photos are fine. Ensure they show:
- A close-up of the damage, in focus
- The material, if you know it
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a few hours, depending on the damage.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Related advice
Repairing versus replacing in Salendine Nook
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why book with us
- Everything repaired in place
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
Read our prices page or resurfacing vs replacement cost guide.
Places near Salendine Nook
What else we do in Salendine Nook
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Common questions in Salendine Nook
Are there extra charges for Salendine Nook?
Travel is included in the price, and we charge the same wherever you are.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Salendine Nook.
How long before I can use the bath?
Generally within a day, though it depends on what we have done.
Do you need bath repair in Salendine Nook?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
If you can see any of these, send us a photo:
- A chip where the taps sit
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
- Snagging damage from a refit
Before booking anyone
- Who turns up on the day
- How changes to the job are handled
- If travel is included in the price
- How long it needs to cure
Where we work around Salendine Nook
Salendine Nook is about 2 miles west of Huddersfield, in Kirklees. Wherever you are in the HD3 postcode area, a technician comes to you. We cover 189 places across Kirklees. Our nearest city page is Leeds, about 16 miles away.
We work across the HD3 postcode area and the streets around it. That includes homes on Haigh Road, Laund Road and Gilead Road and the roads around them. Neighbouring places we cover include Lindley (1 mile north-east), Birchencliffe (1 mile north-east), Longwood (1 mile south), Lower Hirst (1 mile west) and Ainley Top (1 mile north-east). We also work in nearby towns such as Dewsbury (9 miles east), Batley (9 miles north-east), Mirfield (6 miles east), Liversedge (7 miles north-east), Cleckheaton (7 miles north-east) and Heckmondwike (8 miles north-east).
Landmarks near Salendine Nook
Locally, our jobs take us to homes close to The Black Bull Public House, Church of St Stephen and Salendine Nook High School Academy, among other places. The nearest railway station is Lockwood station, about 2.2 miles south-east of the centre. Further afield, we also cover the area around Huddersfield Royal Infirmary (0.9 miles east) and Piazza Centre (2.5 miles east). Green spaces nearby include Moorside Edge.
About our accreditations · Every repair comes with a one-year guarantee.
