Oxfordshire · England
Bath chip & crack repair in Salford, Oxfordshire
Our technicians come to Salford for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips on the rim or sides
- A cracked acrylic bath
How to look after the repair
Simple care helps the repair last. We recommend:
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our bath repair in Salford
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. Typical jobs include a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, in acrylic, roll-top & freestanding and cast iron enamel.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Salford (OX7)
- Area hub
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
It helps to know what we can’t do too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
For landlords and businesses
We work for landlords, letting agents and housing providers in Salford as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Common problems we fix in Salford
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Customers generally contact us about:
- Impact holes in acrylic
- Chips caused by builders
- Cracks in an acrylic bath
- A chip where the taps sit
Questions to ask before booking
- How changes to the job are handled
- What aftercare is recommended
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
Salford: your questions answered
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How it works
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Related advice
Repair or replace in Salford?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Why us?
- Technicians who travel to you, UK-wide
- No extra charge for your area
- CHAS and Constructionline accredited
- We leave the room as we found it
Take a look at our pricing or guide to resurfacing and replacement costs.
How we price bath repair
Prices start from £95. We give every job a fixed quote from photos. These are the things that affect it:
- What kind of damage it is
- The material
- How many items we do on one visit
- Any earlier repairs that need removing first
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- Where you are, by postcode
- A photo taken from further back
- Any details about the material
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Where we work around Salford
Salford is about 12 miles north of Witney, in Oxfordshire. Whether you’re in the middle of Salford or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 443 places in Oxfordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 38 miles away.
Here we cover the OX7 postcode area. Whether you live on Roses Lane, Orchard Close and Cooks Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Over Norton (2 miles east), Chipping Norton (2 miles south-east), Churchill (3 miles south), Sarsden (3 miles south) and Long Compton (3 miles north). Within a short drive, we also cover Banbury (13 miles north-east), Witney (12 miles south), Carterton (13 miles south), Kidlington (15 miles south-east), Neithrop (12 miles north-east) and Grimsbury (14 miles north-east).
What’s near Salford
Locally, our jobs take us to homes close to Church of St Mary, The Black Horse pub and Chipping Norton School and the streets around them. The nearest railway station is Kingham station, about 3.9 miles south-west. A little further out are Wheelbarrow Castle (2.4 miles north-west) and Chipping Norton Museum of Local History (1.6 miles east).
Also in Salford
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
