Oxfordshire · England
Bath Repair in Sarsden
Bath repair for Sarsden, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Impact holes in acrylic
- Rust by the waste and overflow
How we handle bath repair in Sarsden
A typical bath repair is a few hours’ work, and you can normally bathe again the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include a chipped rim or side and damage beneath the taps, on acrylic, roll-top & freestanding and pressed steel enamel.
All our work is covered by our one-year guarantee, wherever you are in Oxfordshire.
- Where
- Sarsden (OX7)
- County
- Oxfordshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition:
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you are working above it
- Keep abrasive pads and gritty cleaners away from the bath
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Also in Sarsden
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Signs you need bath repair in Sarsden
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Customers typically contact us about:
- Chips on the rim or sides
- A chip where the taps sit
- Chips caused by builders
- Cracks in an acrylic bath
Before you book anyone
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- Who turns up on the day
- How to care for the finish
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Questions from Sarsden
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Do you cover the entire of Oxfordshire?
The whole UK, including all of Oxfordshire. Send your postcode with your photos and we’ll offer you dates.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
How much does bath repair cost in Sarsden?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is a cracked acrylic bath repairable?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
How we price bath repair
Repairs from £95. There’s no charge for travel to Sarsden. The price depends on:
- How much damage there is
- Whether we combine several jobs
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
To get a price, send a couple of photos through our quote form or call us. We will say immediately if a repair is the right fix.
Repair or replace in Sarsden?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Work done at your home or business
- One price list for the whole UK
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
Take a look at our pricing or guide to resurfacing and replacement costs.
Sarsden and nearby
Sarsden is about 9 miles north-west of Witney, in Oxfordshire. Customers in Sarsden get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Sarsden is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is Birmingham, about 41 miles away.
Our visits in OX7 are booked in the same way as anywhere else. We also cover the places around Sarsden: Churchill (1 mile north-west), Chipping Norton (3 miles north-east), Salford (3 miles north), Over Norton (3 miles north-east) and Great Rollright (5 miles north-east). We also work in nearby towns such as Banbury (15 miles north-east), Witney (9 miles south-east), Carterton (10 miles south), Kidlington (14 miles south-east), Neithrop (14 miles north-east) and Grimsbury (15 miles north-east).
Around Sarsden
Locally, our jobs take us to homes close to Chipping Norton School, The Chequers pub and Church of St James. The closest station to Sarsden is Kingham station, about 2.2 miles west. Nearby you will also find Chipping Norton Museum (2.6 miles north-east) and Wheelbarrow Castle (4.9 miles north).
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes a morning or an afternoon. If anything looks different from your pictures, we will talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
Ask for a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
