Lincolnshire · England
Bath Repair for Saltfleet homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Saltfleet and across Lincolnshire. Send photos for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Snagging damage from a refit
Bath repair in Saltfleet without replacing anything
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are chips caused by builders and impact holes in acrylic.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Saltfleet (LN11)
- Region
- Lincolnshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Saltfleet clients choose us
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Colour-matched on site
- One price list for the entire UK
See our full price list or bath cost comparison.
Where we work around Saltfleet
Saltfleet is about 8 miles north-east of Louth, in Lincolnshire. We travel to clients in Saltfleet and the surrounding area, so you do not need to take anything anywhere. Saltfleet is one of 732 towns and villages in Lincolnshire we cover. You can also see our page for Leeds, about 76 miles away.
We work across the LN11 postcode area. Jobs here include addresses on Jacklin Drive, Pump Lane and The Hill and the roads around them. We also cover the places around Saltfleet: Skidbrooke North End (1 mile north-west), Skidbrooke (1 mile south-west), South Somercotes (2 miles west), North Somercotes (3 miles north-west) and Scupholme (3 miles south-west). Further out, we also cover Louth (8 miles south-west), New Waltham (12 miles north-west), Mablethorpe (6 miles south-east), Humberston (12 miles north-west), Sutton on Sea (9 miles south-east) and Alford (11 miles south).
What’s near Saltfleet
We visit homes around St Botolph's Church and The New Inn, among other places. The countryside around Saltfleet includes Donna Nook.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
FAQs for Saltfleet
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How long does the repair take to cure?
Normally the following day. We’ll tell you the exact curing time when we finish.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Signs you need bath repair in Saltfleet
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
People usually call us when they notice one of these:
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
- A chipped rim or side
- A chip where the taps sit
Comparing quotes
- Aftercare advice
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- How the room is protected while they work
Aftercare tips
So the finish stays in good condition for years:
- Give the bath a quick rinse after use
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours, depending on the damage. We clean up when we’re done and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the day after, the bath is ready to use.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
Get a quote
For a price in Saltfleet, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Nearby places to Saltfleet
More services for Saltfleet
About our accreditations · Every repair comes with a one-year guarantee.
