Essex · England

Bath chip & crack repair in Seawick, Essex

Problem with your bath in Seawick? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Seawick

How we handle bath repair in Seawick

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. If you’re dealing with holes from dropped items and rusty patches near the plughole, we can help, on roll-top & freestanding, pressed steel enamel and cast iron enamel alike.

All our work is covered by our one-year guarantee, wherever you are in Essex.

Before and after: a chipped, rust-stained bath around the plughole
Area
Seawick (CO16)
Area hub
Essex
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Prices and what affects them

Prices start from £95. You won’t pay by the hour. The price depends on:

  • Where the damage is and how we get to it
  • How much damage there is
  • The type of damage
  • How many items we do on one visit

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • The postcode, so we can plan the visit

Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Seawick, and we’ll reply with a fixed price.

What your bath is made of matters

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the next day.

Before we arrive

  • Ensure the area is dry
  • Move bottles, mats and clutter away from the area
  • Keep a parking space free if you can

Ask for a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Read more

When to call us in Seawick

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.

Send us a photo if you notice any of these:

  • Damage beneath the taps
  • Holes from dropped items
  • Damage done while the bathroom was being fitted
  • Cracks in an acrylic bath

Comparing quotes

  • What the guarantee covers, and for how long
  • What prep work is covered
  • How the colour is matched
  • How long it needs to cure

Our hiring checklist

Where we work around Seawick

Seawick is about 3 miles south-west of Clacton-on-Sea, in Essex. Wherever you are in the CO16 postcode area, we come to you. We work in all 644 towns and villages across Essex, from the larger towns to small villages. Our nearest city page is London, about 54 miles away.

Postcode districts we cover here: CO16. Local streets include Seawick Road, Willow Avenue and Links Road, and we cover them all. We also travel to Jaywick (1 mile east), Lee-over-Sands (1 mile west), St Osyth (2 miles north), Rush Green (2 miles north-east) and Point Clear (3 miles north-west). We also work in nearby towns such as Colchester (11 miles north-west), Clacton-on-Sea (3 miles north-east), Harwich (13 miles north-east), Camulodunum (12 miles north-west), Greenstead (10 miles north-west) and Burnham-on-Crouch (15 miles south-west).

Landmarks near Seawick

Locally, our jobs take us to homes close to Tendring Enterprise Studio School and the streets around them. For rail, the closest station is Clacton-On-Sea station, about 3.3 miles north-east of the centre. Green spaces nearby include Colne Point nature reserve.

Map of Seawick © OpenStreetMap contributors

Landlord and trade work in Seawick

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

What we can’t put right

To be straight with you, there are a few things a repair won’t fix:

  • Rust that has eaten right through a steel bath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we’ll say what we think before booking.

Materials we work on in Seawick

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

Repair or replace: which is better?

People often assume a cracked or chipped bath has to come out. Normally it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.

Why us?

  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • One visit for most repairs
  • No extra charge for your area

Take a look at our pricing and guide to resurfacing and replacement costs.

Questions from Seawick

Is a repair better than a new one?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is there a guarantee?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do the materials smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

Can you quote from photos?

Nearly always. If pictures don’t show enough, we will ask for another angle.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Which areas do you work in?

Across the UK. Our prices are the same everywhere.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.