Essex · England

Bath Repair for Jaywick homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Jaywick. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Rusty patches near the plughole
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Jaywick

Bath repair in Jaywick without replacing anything

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. Common call-outs are for scuffs and scratches in the surface and rust spots around the plughole, in acrylic, roll-top & freestanding and whirlpool & spa baths.

Your repair is guaranteed for a year, as with every job we do.

Where
Jaywick (CO15, CO16)
Area hub
Essex
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Questions from Jaywick

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

Is a cracked acrylic bath repairable?

Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

How we price bath repair

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • What the surface is made of
  • The colour and finish to match
  • Doing more than one item at once
  • The type of damage

Our prices are the same across the UK, so there is no premium for Jaywick. The job itself decides the price: how much damage, what it’s made of and how many items.

How to get a fixed price

You can generally get a fixed price without us visiting. To help us price it:

  • Whether it’s been repaired or coated before
  • A wider photo showing the whole bath
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Common problems we fix in Jaywick

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.

People usually call us when they notice something like this:

  • Holes from dropped items
  • Rust by the waste and overflow
  • Chips on the rim or sides
  • Chips caused by builders

Before booking anyone

  • If travel is included in the price
  • What the guarantee covers, and for how long
  • Whether the price is fixed and includes VAT
  • What happens if the damage is worse than the photos show

Our hiring checklist

What a repair cannot fix

We will always be straight with you, so here’s what a repair can’t fix:

  • Metal that has corroded all the way through
  • Leaking fittings, which need a plumber
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we will say what we think.

Materials we work on in Jaywick

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel

Repair or replace: which is better?

Many people think a damaged bath means a new one. Usually it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • One price list for the entire UK
  • Normally one visit, start to finish

Read our full price list and resurfacing vs replacement cost guide.

Jaywick and the surrounding area

Jaywick is about 2 miles south-west of Clacton-on-Sea, in Essex. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 644 towns and villages in Essex. Our nearest city page is London, about 55 miles away.

Here we cover the CO15 and CO16 postcode area. That includes homes on Park Square West, Park Square East and Gorse Way and the roads around them. Neighbouring places we cover include Seawick (1 mile west), Rush Green (1 mile north-east), Bocking's Elm (2 miles north), St Osyth (2 miles north-west) and Clacton-on-Sea (2 miles north-east). We also work in nearby towns such as Colchester (12 miles north-west), Harwich (13 miles north-east), Camulodunum (13 miles north-west), Greenstead (11 miles north-west), Wivenhoe (9 miles north-west) and Brightlingsea (5 miles north-west).

Near you in Jaywick

Around Jaywick, we work in homes near Bishops Park College, St Christopher and Tendring Enterprise Studio School. Also close by are Never Say Die pub (less than half a mile east) and Sir Martin Frobisher Academy (0.7 miles north). The closest station to Jaywick is Clacton-On-Sea station, roughly 2.2 miles north-east. Green spaces nearby include Colne Point nature reserve.

Map of Jaywick © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

The process

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the following day.

How to prepare

  • Let us know about parking or access
  • Plan for the room to be out of bounds to pets and children
  • Tell us about any previous repairs or coatings

Getting a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.

Get a fixed quote

Advice

Keeping it looking good

Aftercare is simple:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Do not leave a fresh chip for long
  • Cover the bath during DIY or decorating
  • Rinse it down after each bath

Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.