Suffolk · England
Bath Repair in Semer
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Semer and across Suffolk. Free, fixed quotes from your pictures.
- Repairs from £95
- Cracks in an acrylic bath
- Rust by the waste and overflow

About our bath repair in Semer
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We’re often asked to fix hairline or through cracks in acrylic and scratches you can feel with a fingernail, across roll-top & freestanding, cast iron enamel and acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Semer (IP7)
- Region
- Suffolk
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Signs you need bath repair in Semer
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The things customers generally mention when they call are:
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
- Holes from dropped items
- A chip where the taps sit
Comparing quotes
- What prep work is covered
- What aftercare is recommended
- Whether the price covers travel
- How changes to the job are handled
Landlord and trade work in Semer
We work for landlords, letting agents and housing providers in Semer as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs in Suffolk and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Protect the bath with a towel when doing jobs nearby
- Rinse the bath after use, especially in hard water areas
- Make sure an acrylic bath is firm underfoot
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
What else we do in Semer
Repair or replace in Semer?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Semer. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
- One visit for most repairs
- We come to you, anywhere in the UK
See our prices page and bath cost comparison.
What bath repair costs
Prices start from £95. There is no area surcharge for Semer. The price reflects:
- Doing more than one item at once
- The material
- Whether old repairs or coatings need taking off
- What kind of damage it is
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- Where you are, by postcode
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Wear across the entire surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Common questions in Semer
Can you repair a failed DIY repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
When can I have a bath again?
Usually within a day, though it depends on what we have done.
Which areas do you work in?
The entire UK, including all of Suffolk. Just include your postcode and we’ll offer you dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Semer and nearby
Semer is about 8 miles east of Sudbury, in Suffolk. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Semer is one of 731 towns and villages in Suffolk where we work. We work right across the region, from Semer to London (59 miles away).
We work across the IP7 postcode area. Neighbouring places we cover include Nedging (1 mile north), Kersey (2 miles south), Whatfield (2 miles east), Oaks Tye (2 miles south) and Stone Street (2 miles south-east). Larger places within reach include Ipswich (10 miles east), Bury St Edmunds (14 miles north-west), Sudbury (8 miles west), Stowmarket (8 miles north-east), Kesgrave (14 miles east) and Hadleigh (3 miles south-east).
What’s near Semer
Typical jobs here are in homes near Church of All Saints. A little further out are Lindsey Castle (1.9 miles south-west). Open spaces near Semer include Groton Wood.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for two to three hours for most chips. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Point us to the nearest place to park
How to get a price
Send us photos of the damage and a wider shot of the entire item, with your IP7 postcode, and we will come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

