Leicestershire · England
Bath chip & crack repair in Shepshed, Leicestershire
Bath repair across Shepshed and nearby, done in a single visit in most cases.
- Repairs from £95
- A hole punched through by something heavy
- Scuffs and scratches in the surface
Keeping it looking good
How the surface is treated afterwards matters:
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
- Keep metal cans and razors off the surface
- Put a towel in the bath if you’re working above it
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Bath repair in Shepshed without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We’re frequently asked to fix rusty patches near the plughole and chips caused by builders, across pressed steel enamel, acrylic and roll-top & freestanding.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Location
- Shepshed (LE12)
- Region
- Leicestershire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Leicestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we do, step by step
We agree an arrival time beforehand. Once we are there, the work takes a morning or an afternoon in most cases. The room is left tidy and you’ll know when it can be used.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Clear the area around the damage
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Shepshed clients choose us
- Same prices wherever you are
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
Take a look at our prices page and bath cost comparison.
Shepshed questions
Do you work in Shepshed?
We do. Technicians travel to Shepshed from across the region, and the price is the same as everywhere else.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Also near Shepshed
More services for Shepshed
Shepshed and nearby
Shepshed is about 3 miles west of Loughborough, in Leicestershire. Jobs in Shepshed are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Shepshed is one of 287 towns and villages in Leicestershire we cover. You can also see our page for Birmingham, about 33 miles away.
Here we cover the LE12 postcode area. From Lambert Avenue, Wightman Close and Weavers Avenue or a nearby road, a technician can come to you. With the A512 close by, Shepshed is simple for us to get to. Other places close to Shepshed include Nanpantan (2 miles south-east), Hathern (2 miles north-east), Thorpe Acre (2 miles east), Loughborough (3 miles east) and Shelthorpe (4 miles east). We also work in nearby towns such as Wigston (15 miles south-east), Coalville (4 miles south-west), Ashby-de-la-Zouch (8 miles west), Syston (10 miles south-east), Blaby (15 miles south) and Earl Shilton (14 miles south). Being one of Leicestershire’s larger places, Shepshed sees plenty of our work.
Near you in Shepshed
Our customers here include homes close to St Botolph's Church, Morley Quarry and Oxley Primary School Shepshed, among other places. The closest station to Shepshed is Loughborough station, about 4.1 miles east of the centre. Other landmarks nearby include Old Rectory Museum (3.6 miles east) and Garendon (1.9 miles east). Not far away are Beacon Hill and Charnwood Lodge.
Signs you need bath repair in Shepshed
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People normally call us when they notice one of these:
- Snagging damage from a refit
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
- Rust spots around the plughole
Comparing quotes
- What protection goes down before work starts
- Whether the price covers travel
- Who will actually do the work
- Whether the price is fixed and includes VAT
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
