Oxfordshire · England

Bath Repair in Shiplake

Bath repair in Shiplake without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Shiplake

Work for landlords and builders

If you manage property in Shiplake, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Bath repair in Shiplake, done in place

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and common reasons people get in touch are chips on the rim or sides and hairline or through cracks in acrylic.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Area
Shiplake (RG9)
County
Oxfordshire
Cover
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Covering Shiplake

Shiplake is about 3 miles north of Woodley, in Oxfordshire. Our technicians come to homes and businesses in Shiplake, so nothing has to leave your home. Our technicians cover all 443 towns and villages in Oxfordshire. Our nearest city page is London, about 35 miles away.

Every address in RG9 is within our area. Close by, we cover Charvil (2 miles south), Twyford (2 miles south-east), Ruscombe (2 miles south-east), Hare Hatch (2 miles east) and The Holt (3 miles east). We also work in nearby towns such as Benson (12 miles north-west), Chinnor (14 miles north), Tilehurst (7 miles south-west), Wallingford (12 miles north-west), Little Heath (7 miles west) and Oakley (14 miles north).

What’s near Shiplake

Around Shiplake, we work in homes near Loddon Nature Reserve, The Piggott School and The Plough pub and the streets around them. Other local landmarks include Church of St Peter and St Paul (under half a mile south-east), Shiplake Church of England School (less than half a mile north-west) and Blessed Hugh Faringdon Catholic School (1.2 miles south-east). For rail, the closest station is Wargrave station, about 0.9 miles east. A little further out are Royal Berkshire Hospital (4.2 miles south-west) and Frazer Nash Archives (2.1 miles north). The countryside around Shiplake includes South Lake and Sonning Hill.

Map of Shiplake © OpenStreetMap contributors

How we price bath repair

Repairs from £95. You’ll know the full cost before you book. We look at:

  • What kind of damage it is
  • The material and finish
  • How many items we do on one visit
  • Access to the area

A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Send photos for a quote

A couple of clear pictures is all it takes. It helps if you send:

  • A wider photo showing the entire bath
  • Any details about the material
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • A bath that moves underfoot, until its support is fixed
  • Leaking fittings, which need a plumber
  • Acrylic cracks with no access behind them

Not sure? Send photos and we will give you a straight answer before you book.

Materials we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

Signs you need bath repair in Shiplake

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

If you can see any of these, send us a photo:

  • A failed DIY repair that is discoloured or lifting
  • A chip where the taps sit
  • Rust by the waste and overflow
  • Chips along the edge of the bath

What your quote should include

  • What happens if they find more damage
  • How soon you can use it again
  • What protection goes down before work starts
  • If travel is included in the price

Our hiring checklist

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can typically use the bath the following day.

How to prepare

  • Keep a parking space free if you can
  • Let the surface dry out before the visit
  • Keep pets and children out of the room while we work

Get a quote

For a price in Shiplake, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Shiplake: your questions answered

Is a repair better than a new one?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.

Are there extra charges for Shiplake?

Travel is included in the price, and we charge the same wherever you are.

What happens if you find more damage?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Will I be able to see the repair?

On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Repair or replace: which is better?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • We will tell you if it’s not worth repairing
  • Normally one visit, start to finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • A fixed quote before booking

See our prices page and bath cost comparison.

Can I fix it myself?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.