Oxfordshire · England
Bath Repair for Tilehurst homes
Damaged bath in Tilehurst? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A kit repair that didn’t last
- Rust by the waste and overflow
Repair or replace in Tilehurst?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Tilehurst
- Colours mixed by hand to suit your surface
- One visit for most repairs
- Dust sheets down, tidy finish
- A year’s guarantee on all work
Take a look at our prices page and resurfacing vs replacement cost guide.
Bath repair in Tilehurst, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Whether it’s damage done while the bathroom was being fitted and a kit repair that didn’t last, we can help, on acrylic, cast iron enamel and pressed steel enamel alike.
A one-year guarantee comes as standard.
- Area
- Tilehurst (RG31, RG30)
- Region
- Oxfordshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
- Don’t scrub with anything abrasive
- Give the bath a quick rinse after use
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Where we work around Tilehurst
Tilehurst is about 3 miles west of Reading, in Oxfordshire. Anywhere in RG31, a technician comes to you. Tilehurst is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is London, about 41 miles away.
We work across RG31 and RG30. Streets in the area include Ash Road, Tyle Road and Riley Road, and we cover them all. We also cover the places around Tilehurst: Tilehurst Within (1 mile south-east), Norcot (1 mile east), Little Heath (1 mile west), Horncastle (1 mile south-east) and Purley on Thames (1 mile north). We also work in nearby towns such as Didcot (14 miles north-west), Henley-on-Thames (7 miles north-east), Benson (11 miles north), Wallingford (10 miles north-west), Great Western Park (14 miles north-west) and Watlington (13 miles north).
Local landmarks in Tilehurst
We visit homes around Round Copse, The Butchers Arms and Tilehurst Methodist Church. Nearby too are Park Lane Primary School (under half a mile south-west) and Little Heath School (1.1 miles south-west). The nearest railway station is Tilehurst station, about 0.8 miles north of the centre. Nearby you’ll also find Battle Hospital (1.7 miles east) and Broad Street Mall (2.6 miles east). For a walk, there’s South Lake and Moor Copse Nature Reserve.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Your questions about bath repair in Tilehurst
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Is there any odour?
Expect a mild smell while we’re working.
Can you repair a hole in a bath?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
How we price bath repair
Repairs from £95. There’s no area surcharge for Tilehurst. The price reflects:
- Previous DIY repairs that have to come out
- Access to the area
- Unusual colours or finishes
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A photo taken from further back
- A close-up of the damage, in focus
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours. Before we go, we will explain when it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Ask for a price
Email us a picture of the damage and a wider shot of the whole item, with your RG31 postcode, and we will reply with a fixed quote.
Related advice
Towns and villages near Tilehurst
More services for Tilehurst
Common problems we fix in Tilehurst
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- A chip where the taps sit
- A chipped rim or side
- Snagging damage from a refit
What your quote should include
- Whether the price covers travel
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Leaking fittings, which need a plumber
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly before you book.
Materials we work on in Tilehurst
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
