Derbyshire · England
Bath Repair in Snelston
We travel to Snelston for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Damage beneath the taps
Repairing versus replacing in Snelston
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- We leave the room as we found it
- A fixed quote before you book
- Everything repaired in place
- Honest advice, even when it means no job
See our pricing and bath cost comparison.
Bath repair in Snelston without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Common call-outs are for chips along the edge of the bath and chips caused by builders, across pressed steel enamel, cast iron enamel and roll-top & freestanding.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Snelston (DE6)
- Region
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Snelston and nearby
Snelston is about 7 miles north-east of Uttoxeter, in Derbyshire. Jobs in Snelston are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Snelston is one of 532 towns and villages in Derbyshire where we work. We work right across the region, from Snelston to Birmingham (about 36 miles away).
Our repair technicians cover all of DE6. We also cover the places around Snelston: Anacrehill (1 mile south), Middle Mayfield (1 mile north-west), Snelston Common (1 mile south-west), Edlaston (2 miles east) and Wyaston (2 miles east). Within a short drive, we also cover Belper (13 miles east), Matlock (14 miles north-east), Hilton (10 miles south-east), Darley Dale (14 miles north-east), Wirksworth (10 miles north-east) and Duffield (12 miles east).
Near you in Snelston
Typical jobs here are in homes near Church of St Peter and Rose and Crown pub. Nearby you will also find Ashbourne Rural District (2.6 miles north-east) and St Oswalds Hospital (2.2 miles north-east). Open spaces near Snelston include Thorpe Cloud and Thorswood.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath repair in Snelston?
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Look out for these signs:
- Scratches you can feel with a fingernail
- Snagging damage from a refit
- Cracks in an acrylic bath
- A kit repair that didn’t last
Comparing quotes
- What the guarantee covers, and for how long
- What preparation is included
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We clean up when we are done and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Nearby places to Snelston
Also in Snelston
Common questions in Snelston
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
What happens next?
We come back with a fixed quote. You’re under no obligation.
How long does the repair take to cure?
Typically the next day. We confirm the time before we leave.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Do you cover Snelston?
We do. Repair technicians travel to Snelston from across the region, and the price is the same as everywhere else.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What bath repair costs
Repairs from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Whether we combine several jobs
- How much damage there is
We charge the same wherever you are, with no extra for Snelston. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- What it’s made of, if you know
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
When we would advise against a repair
A repair isn’t right for every job, including:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Materials we work on in Snelston
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
