Nottinghamshire · England
Bath chip & crack repair in South Leverton, Nottinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in South Leverton, with a one-year guarantee on every repair.
- Repairs from £95
- Rust spots around the plughole
- Impact holes in acrylic
Bath repair in South Leverton without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. If you are dealing with deep scratches in acrylic and an old repair that has yellowed or come loose, we can help.
All our work is covered by our one-year guarantee, wherever you are in Nottinghamshire.
- Where
- South Leverton (DN22)
- County
- Nottinghamshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
South Leverton: your questions answered
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Covering South Leverton
South Leverton is about 5 miles east of Retford, in Nottinghamshire. Clients in South Leverton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 329 towns and villages in Nottinghamshire, from the larger towns to small villages. You can also see our page for Leeds, about 45 miles away.
We cover every part of DN22 and the streets around it. Whether you live on Station Road, Church Street and Town Street or anywhere nearby, a technician can come to you. We also cover the places around South Leverton: North Leverton with Habblesthorpe (1 mile north), Treswell (1 mile south), Sturton le Steeple (2 miles north), Grove (3 miles west) and South Wheatley (3 miles north-west). Further out, we also cover Worksop (12 miles west), Retford (5 miles west), New Ollerton (11 miles south-west), Kilton (12 miles west), Edwinstowe (13 miles south-west) and Bracebridge (12 miles west).
Landmarks near South Leverton
In South Leverton, that means homes near Leverton Church of England Academy and All Saints' Church. Nearby you will also find Rampton Secure Hospital (2.2 miles south) and Grove Castle Hill (2.7 miles west).
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes two to three hours for most chips. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Ask for a price
If you are in South Leverton and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Landlord and trade work in South Leverton
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Also near South Leverton
Also in South Leverton
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What we are called out for in South Leverton
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Get in touch if you’ve noticed any of these:
- Holes from dropped items
- A kit repair that didn’t last
- Chips on the rim or sides
- Deep scratches in acrylic
Questions to ask before you book
- How your room will be protected
- Aftercare advice
- How the colour is matched
- Who will actually do the work
How we price bath repair
Repairs from £95. We don’t charge extra for travel to South Leverton. The price comes down to:
- Previous DIY repairs that have to come out
- Access to the area
- How many items we do on one visit
- How hard the colour is to match
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Something in shot to show the size
- A wider photo showing the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
