Kent · England
Bath Repair in South Stour
Damaged bath in South Stour? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips caused by builders
- Rust spots around the plughole
Landlord and trade work in South Stour
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
About our bath repair in South Stour
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a failed DIY repair that’s discoloured or lifting and chips under the taps, on roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
Big or small, you get the same one-year guarantee.
- Area
- South Stour (TN25)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
South Stour: your questions answered
Are there extra charges for South Stour?
No. Our quotes include travel, with the same prices everywhere we work.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you cover South Stour?
Yes. We work across the UK and travel to South Stour. Send pictures and we’ll quote, or call 0345 017 0787.
How long does the repair take to cure?
Normally the following day. We will tell you the exact curing time when we finish.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why us?
- Every repair guaranteed for a year
- A fixed quote before you book
- Colour-matched on site
- Dust sheets down, tidy finish
Take a look at our prices page and resurfacing vs replacement cost guide.
Also in South Stour
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
What a repair cannot fix
A repair is not right for every job, including:
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we cannot reach from underneath
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
How we price bath repair
Repairs from £95. You will not pay by the hour. The price depends on:
- The size and number of damaged areas
- How many items we do on one visit
- Previous DIY repairs that have to come out
- The material
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed quote
You can take the photos on your phone. Just ensure we can see:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
For a price in South Stour, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Our work in South Stour
South Stour is about 3 miles south-east of Ashford, in Kent. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. South Stour is one of 922 places in Kent where we work. Our nearest city page is London, about 51 miles away.
Postcode districts we cover here: TN25. We also travel to Mersham (1 mile north-east), Sevington (2 miles north), Hinxhill Park (2 miles north), Ridgeway (3 miles north-east) and Hinxhill (3 miles north-east). Within a short drive, we also cover Ashford (3 miles north-west), Canterbury (14 miles north-east), Folkestone (11 miles east), Faversham (14 miles north), Hythe (8 miles east) and Davington (15 miles north).
Local landmarks in South Stour
Our customers here include homes close to Poulton Wood and Finberry Primary School and the streets around them. The closest station to South Stour is Ashford International station, roughly 2.8 miles north-west of the centre. Other landmarks nearby include William Harvey Hospital (2.4 miles north) and Ashford Designer Outlet (2.3 miles north-west). For a walk, there’s Hatch Park.
Signs you need bath repair in South Stour
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- Damage done while the bathroom was being fitted
- Hairline or through cracks in acrylic
- A chip where the taps sit
- Rust spots around the plughole
Questions to ask before you book
- What preparation is included
- What happens if they find more damage
- Who turns up on the day
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
