Hampshire · England
Bath Repair for South Warnborough homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in South Warnborough and across Hampshire. Free, fixed quotes from your photos.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Bath repair in South Warnborough, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the day after. We regularly repair roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and common reasons people contact us are a kit repair that didn’t last and rusty patches near the plughole.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Where
- South Warnborough (RG29)
- Area hub
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Also near South Warnborough
Other services in South Warnborough
What we can’t put right
In fairness, there are a few things a repair will not fix:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
What we’re called out for in South Warnborough
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Contact us if you’ve noticed:
- Chips under the taps
- Cracks in an acrylic bath
- Chips along the edge of the bath
- Chips caused by builders
Comparing quotes
- What happens if they find more damage
- How soon you can use it again
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Your questions about bath repair in South Warnborough
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Are there extra charges for South Warnborough?
Travel is included in the price, and we charge the same wherever you are.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
What happens if you find more damage?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
About South Warnborough
South Warnborough is about 5 miles north of Alton, in Hampshire. Jobs in South Warnborough are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. South Warnborough is one of 683 towns and villages in Hampshire we cover. You can also see our page for London, about 42 miles away.
We cover every part of the RG29 postcode area. That includes homes on Gaston Lane, Tigwells Field and Alton Road and the roads around them. Nearby, we also work in Long Sutton (1 mile east), Bidden (1 mile north-west), Little Hoddington (1 mile north-west), Well (2 miles east) and Greywell (3 miles north). We also work in nearby towns such as Basingstoke (7 miles north-west), Farnborough (10 miles north-east), Fleet (7 miles north-east), Aldershot (9 miles east), Alton (5 miles south) and Petersfield (15 miles south).
What’s near South Warnborough
Around South Warnborough, we work in homes near Church of St Andrew and Robert May's School and the streets around them. The closest station to South Warnborough is Hook station, about 3.9 miles north of the centre. A little further out are Odiham Castle (2.7 miles north) and Gliding Heritage Centre (3.5 miles south-west). Not far away are Holybourne Hill and Dogmersfield Lake.
How it works
We work cleanly and quietly. We protect the area first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Give the bath a quick rinse after use
- Store metal items away from the bath
- If an acrylic bath flexes, have its feet adjusted
- Stick to mild cleaners and a soft cloth
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
What bath repair costs
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- The material
- Doing more than one item at once
- Access to the area
- The size and number of damaged areas
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A photo taken from further back
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
