Staffordshire · England
Bath Repair in Spath
Problem with your bath in Spath? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- Cracks in an acrylic bath
What affects the price in Spath
Prices start from £95. We price every job individually, from your photos. The main factors are:
- The type of damage
- What the surface is made of
- The colour and finish to match
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- The material, if you know it
- A photo taken from further back
To get a price, send a couple of photos through our quote form or call us. We’ll say straight away if a repair is the right fix.
How we handle bath repair in Spath
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. Typical jobs include scratches you can feel with a fingernail and chips under the taps, on cast iron enamel, pressed steel enamel and roll-top & freestanding.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Spath (ST14)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Common questions in Spath
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
What about rust by the waste?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How long does the repair take to cure?
Normally by the following day, though it depends on what we’ve done.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Common problems we fix in Spath
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Common reasons people in Spath contact us are:
- Chips under the taps
- Impact holes in acrylic
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
What your quote should include
- Whether there are any call-out or travel charges
- Who will actually do the work
- How soon you can use it again
- What preparation is included
Repair or replace in Spath?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Spath
- A fixed quote before you book
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- A year’s guarantee on all work
See our prices page or guide to resurfacing and replacement costs.
Also in Spath
The process
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours, depending on the damage. We leave the room clean and you will know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Before we arrive
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
Spath and nearby
Spath is about 1 mile north of Uttoxeter, in Staffordshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 512 towns and villages in Staffordshire, from the larger towns to small villages. Our jobs stretch from Spath to Birmingham (31 miles away).
Postcode districts we cover here: ST14. Nearby, we also work in Stramshall (1 mile north-west), The Heath (1 mile south), Uttoxeter (1 mile south), Doveridge (2 miles east) and Waldley (3 miles north-east). Within a short drive, we also cover Stafford (13 miles south-west), Burton upon Trent (12 miles south-east), Longton (12 miles north-west), Rugeley (11 miles south), Stone (11 miles west) and Leek (15 miles north-west).
Landmarks near Spath
We visit homes around St Mary's CofE (A) First School, Church of St Michael and Thomas Alleyne's High School and the streets around them. The nearest railway station is Uttoxeter station, about 1.4 miles south-east. Well-known places in the area include Alton Castle (4.6 miles north) and Redfern's Cottage (1.2 miles south).
Honest limits
Some jobs aren’t right for a repair, including:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Looking after it afterwards
So the finish stays in good condition:
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
- Give the bath a quick rinse after use
- Put a towel in the bath if you’re working above it
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
