Staffordshire · England
Bath chip & crack repair in Stone, Staffordshire
Damaged bath in Stone? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
Keeping it looking good
Simple care helps the repair last. Our advice:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- Put a towel in the bath if you are working above it
- Stick to mild cleaners and a soft cloth
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our bath repair in Stone
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and common reasons people contact us are holes from dropped items and deep scratches in acrylic.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Stone (ST15)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Stone
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Stone customers choose us
- Work done at your home or business
- Every repair guaranteed for a year
- A fixed quote before booking
- Honest advice, even when it means no job
See our pricing or resurfacing vs replacement cost guide.
Landlord and trade work in Stone
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Stone
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Stone and nearby
Stone is about 6 miles north of Stafford, in Staffordshire. We travel to homes and businesses in Stone and nearby villages, so there is no workshop to go to. Our repair technicians cover 512 places across Staffordshire. Our jobs stretch from Stone to Birmingham (about 31 miles away).
Every address in ST15 is within our area, from the main roads to the quietest streets. We regularly work on streets such as High Street, Station Road and Queen's Square and the roads around them. Being close to the A34 and A520, Stone is easy for our repair technicians to reach. If you’re just outside Stone, we cover Little Stoke (1 mile south-east), Aston-by-Stone (1 mile south-east), Cold Norton (2 miles south-west), Yarnfield (2 miles west) and Norton Bridge (3 miles south-west). Within a short drive, we also cover Stafford (6 miles south), Newcastle-under-Lyme (9 miles north-west), Cannock (15 miles south), Longton (6 miles north), Rugeley (13 miles south-east) and Leek (15 miles north). Stone is among the bigger towns we cover in Staffordshire.
Around Stone
Our customers here include homes close to The Star pub, Church of St Michael and Alleyne's Academy. The closest station to Stone is Stone station, roughly 0.9 miles north-west. Further afield, we also cover the area around V&A Wedgwood Collection (3.9 miles north). The countryside around Stone includes Hem Heath Woods.
Nearby places to Stone
Other services in Stone
What happens on the day
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Your questions about bath repair in Stone
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What happens next?
You will get a fixed quote back, generally with dates to choose from. You are under no obligation.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Signs you need bath repair in Stone
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we’re asked about most:
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- Holes from dropped items
- A chip where the taps sit
What your quote should include
- How long it needs to cure
- Whether there are any call-out or travel charges
- How to care for the finish
- Who turns up on the day
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
