Highland · Scotland
Bath Repair in Spean Bridge
Problem with your bath in Spean Bridge? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Deep scratches in acrylic
- Cracks in an acrylic bath
What bath repair costs
Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:
- Where the damage is and how we get to it
- How many areas need work
- Whether old repairs or coatings need taking off
- What kind of damage it is
We charge the same wherever you are, so there’s no premium for Spean Bridge. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- A picture taken from further back
- Where you are, by postcode
- Details of any past repairs
- The material, if you know it
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Spean Bridge, and we will reply with a fixed quote.
Bath repair in Spean Bridge, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. If you are dealing with chips caused by builders and holes from dropped items, we can help, on cast iron enamel, roll-top & freestanding and whirlpool & spa baths alike.
All our work is covered by a one-year guarantee.
- Location
- Spean Bridge (PH34)
- County
- Highland
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
Some jobs are not right for a repair, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Your questions about bath repair in Spean Bridge
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Spean Bridge and nearby
Spean Bridge is in Highland. Whether you are in the middle of Spean Bridge or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Spean Bridge is one of 253 towns and villages in Highland where we work. Our jobs stretch from Spean Bridge to Glasgow (76 miles away).
Our technicians cover all of the PH34 postcode area and the streets around it. You’ll find streets such as Nursery Park, Spean Crescent and Aonachan Gardens, all of which we cover. Neighbouring places we cover include Roybridge (3 miles east), Torlundy (6 miles south-west), Taobh Lochaidh (7 miles south-west), Banbhaidh (8 miles south-west) and Caol (8 miles south-west). For island and remote addresses, ring us first and we will plan the trip.
Around Spean Bridge
Locally, our jobs take us to homes close to Spean Bridge. There is a railway station in Spean Bridge itself: Spean Bridge station. Other landmarks nearby include Old House of Keppoch (3.1 miles east) and Commando Museum (under half a mile south).
Aftercare tips
Once the work has cured, treat it gently:
- Put a towel in the bath if you are working above it
- Check that an acrylic bath does not move when you stand in it
- Get any new chip repaired before it rusts
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Signs you need bath repair in Spean Bridge
A cracked acrylic bath usually wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
The things clients generally mention when they call include:
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
What your quote should include
- Whether the colour is mixed to match
- How your room will be protected
- The length of the guarantee and what it covers
- If travel is included in the price
Landlord and trade work in Spean Bridge
We’re used to working with agents and managing companies. Send the address, photos and access details.
Housing associations and facilities teams use us for planned and reactive repairs in Highland and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Open a window if you can
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Read more
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Also near Spean Bridge
What else we do in Spean Bridge
About our accreditations · Every repair comes with a one-year guarantee.
